User manual PANASONIC KX-TS108W

[. . . ] Integrated Telephone System Preparation Model No. KX-TS108W Pulse-or-tone dialing capability Operating Instructions Basic Operation Advanced Operation Useful Information PLEASE READ BEFORE USE AND SAVE. Panasonic World Wide Web address: http://www. panasonic. com for customers in the USA or Puerto Rico Before Initial Use Please read IMPORTANT SAFETY INSTRUCTIONS on page 34 before use. Read and understand all instructions. Thank you for purchasing your new Panasonic integrated telephone. Attach your purchase receipt here. For your future reference Serial No. (found on the bottom of the unit) Date of purchase Name and address of dealer 2 Accessories (included) For extra orders, call 1-800-332-5368. Handset (p. PQJA212M one Telephone Line Cord (p. PQKL10038Y1 one one For assistance, please call: 1-800-211-PANA(7262) 3 Contents Preparation Location of Controls . [. . . ] The unit will return to the standby mode. Advanced Operation You can use the following features while the dialing buttons are locked. Dialing a number you programmed into the memory of the EMERGENCY button (p. 22) Adjusting the handset and speakerphone volumes (p. 24) Answering the second call by pressing (FLASH) (p. 23) To cancel the dial lock Follow steps 1 through 3 above again. " " will disappear, and the unit will return to the standby mode. For assistance, please call: 1-800-211-PANA(7262) 27 " Special Features Call Restriction You can prevent the unit from dialing phone numbers beginning with specified digit(s) (1 digit or 2 digits). Phone numbers with the restricted leading digits cannot be dialed out. To set the call restriction 1 2 3 Make sure that a call is not put on hold. Press (1). If you use "1111" as a PIN code (factory set), the display on the right will be shown. After the PIN code is changed, "­ ­ ­ ­" will be displayed. 4 5 6 7 Enter the PIN code (p. Your PIN code is "1234". ) Press (PROGRAM). If a wrong PIN code is entered, 3 beeps will sound. Enter a correct PIN code and press (PROGRAM). "67" is entered as the restricted digits. ) Enter the number(s) (1 digit or 2 digits) you want to restrict ((0) to (9)). "12" is entered as the restricted digits. ) If you enter a wrong number, enter a correct number. To change restricted digits from 2 digits to 1 digit, press ($) for 2 digits to change to "­ ­" and enter 1 digit. Press (PROGRAM). The unit will return to the standby mode. If your unit is connected to a PBX, this function may not operate. Contact your PBX supplier for more information. When dialing a phone number with the restricted leading digit(s), the dialed number will flash on the display, but not dialed out. 28 To cancel the call restriction Follow steps 1 through 5 on page 28. In step 6, press ($) to cancel call restriction ("­ ­" is displayed) and press (PROGRAM). A long beep will sound and the unit will return to the standby mode. Optional Headset Plugging an optional headset into the unit allows a hands-free phone conversation. Please use only a Panasonic KX-TCA87 or KX-TCA90 headset. To order, call the accessories telephone number on page 3. " Connecting an Optional Headset to the Unit Connect an optional headset to the headset jack as shown below. The illustration headset is a KX-TCA90. Headset Jack Hook Microphone Earpiece Useful Information If you want to have a normal conversation, disconnect the headset. For assistance, please call: 1-800-211-PANA(7262) 29 " Optional Headset Making/Answering Calls Make sure to install the batteries. VOLUME (_), (^) (SP-PHONE/HEADSET) and Indicator 1 2 Press (SP-PHONE/HEADSET) to make or answer a call. The SP-PHONE/HEADSET indicator flashes. If you misdial when making a call, press (SP-PHONE/HEADSET) twice and dial again. To hang up, press (SP-PHONE/HEADSET). The indicator light goes out. To adjust the headset receiver volume (4 levels): While using the headset, press VOLUME (_) or (^). During a conversation using the headset, you cannot switch the call to the handset by lifting it off the cradle. [. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. [. . . ]