User manual PANASONIC KX-TVS120

[. . . ] For assistance, visit our website: http://www. panasonic. com/help for customers in the U. S. A. or Puerto Rico. Table of Contents Introduction Product information . 7 Useful Information Wall mounting for charger. 46 46 46 47 48 52 55 56 57 Preparation Controls. [. . . ] Base unit: {C} Handset: {MENU} i {#}{2}{8}{0} {MENU} {V}/{^}: "Group" i {SELECT} {V}/{^}: Select the desired group. i {SELECT} {V}/{^}: Select the current setting of the group ringer tone. i {SELECT} {V}/{^}: Select the desired item. i {SAVE} Proceed with the operation for your unit. Base unit: {} (EXIT) Handset: {OFF} Caller ID features When an outside call is being received, the caller's name and phone number are displayed. Caller information for the last 50 callers is logged in the caller list from the most recent call to the oldest. L If the unit cannot receive caller information, the following is displayed: ­ "Out of area": The caller dials from an area which does not provide Caller ID service. ­ "Private caller": The caller requests not to send caller information. ­ "Long distance": The caller makes a long distance call. L If the unit is connected to a PBX system, caller information may not be received properly. Missed calls If a call is not answered, the unit treats the call as a missed call. Next time when someone calls from the same Area Code, caller information is customized by the unit as follows: ­ When the call is being received, the Caller ID number is displayed in the same Format as the Edited Number. ­ After the call is ended, the phone number of the caller, when reviewed from the Caller list, is displayed in the same Format as the Edited Number. For example, you can use this feature to set the unit to ignore the area code of callers in your area code, so that you can call these local numbers using caller information without dialing the area code. To activate this feature, you must edit an item in the caller list, then call that number. After that, phone numbers from that caller's area code are edited automatically. This feature can be turned on or off (page 28). Note: L Phone numbers from the 4 most recently edited area codes are automatically edited. L If you move to another area, you can turn this feature off to erase previously edited area codes. To use this feature again, turn it on and reprogram the area codes you want to edit once again. Editing a caller's phone number before calling back You can edit a phone number in the caller list by removing its area code and/or the long distance code "1". : Base unit / Y Handset 1 2 3 4 Proceed with the operation for your unit. Base unit: {CID} Handset: {MENU} i {#}{2}{1}{3} {V}/{^}: Select the desired entry. [. . . ] This Limited Warranty is extended only to the original purchaser and only covers products purchased as new. Ship-In Service For assistance in the continental U. S. A. in obtaining repairs please ship the product prepaid to: PSTC (Panasonic) Exchange Center, 4900 George McVay Drive, Suite B Door #12, McAllen, TX 78503 panacare@us. panasonic. com When shipping the unit carefully pack in a padded shipping carton, include all accessories, and send it prepaid. Include a letter detailing the complaint, a return address and provide a day time phone number where you can be reached. Keep the tracking number for your records. [. . . ]