User manual PANASONIC LC-40

[. . . ] Para la explicación en español, consulte el CD-ROM uministrado. Before operating this product, please read the instructions carefully and save this manual for future use. S1108T0 -P D Printed in Japan ENGLISH VQT2A05 Read this first !(for BT-LH2550P) CAUTION: In order to maintain adequate ventilation, do not install or place this unit in a bookcase, built-in cabinet or any other confined space. To prevent risk of electric shock or fire hazard due to overheating, ensure that curtains and any other materials do not obstruct the ventilation. CAUTION: TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. CAUTION: This apparatus can be operated at a voltage in the range of 100 - 240 V AC. Voltages other than 120 V are not intended for U. S. A. [. . . ] <WIDE3> Sets the gamma curve to 2. 6 in wide color gamut (using DCinema color space) mode. Both the main window and sub-window can be set up in the split-screen display of the "TWO WINDOW" function. <USER 0 - 63> Adjustable settings 0 - 63 (equivalent to a color temperature range of 3, 000 - 9, 300K) <D93> Equivalent to a color temperature of 9, 300K <D65> Equivalent to a color temperature of 6, 500K <D56> Equivalent to a color temperature of 5, 600K <VAR1> WB adjustment mode*4 <VAR2> WB adjustment mode*4 *4 <VAR3> WB adjustment mode USER20 is approximately 5000 K and USER33 is approximately 6300 K. Selects the width of outline correction edge. Both the main window and sub-window can be set up in the split-screen display of the "TWO WINDOW" function. <HIGH> Thin edge <LOW> Wide edge Sets horizontal outline correction. The item display moves to the lower part of the screen during adjustment. Both the main window and subwindow can be set up in the split-screen display of the "TWO WINDOW" function. The item display moves to the lower part of the screen during adjustment. Both the main window and subwindow can be set up in the split-screen display of the "TWO WINDOW" function. COLOR SPACE SMPTE-C*7 EBU*7 ITU-709 WIDE1 WIDE2 WIDE3 COLOR TEMP. USER0 - 63*5 D93 D65 D56 VAR1 VAR2 VAR3 SHARPNESS MODE*2 HIGH*3 LOW SHARPNESS H*2 0 - 30*3 SHARPNESS V*2 0 - 30*3 *1 Changes are not reflected to a still image in the main window in the split-screen display of the "TWO WINDOW" function. *2 These functions are not available when "RGB-COMP. " under "YPBPR/RGB" or "DVI-COMP. " under "DVI-D" is selected in the "INPUT SELECT" menu ( page 36). The gamma curve is set to STANDARD when "RGBCOMP" or "DVI-COMP" is selected. Selecting WIDE1 to 3 for "COLOR SPACE" produces the gamma curve fixed to that "COLOR SPACE. " *6 To use the "TWO WINDOW" ( page 34) function, 1) Change settings after exiting the "TWO WINDOW" function. 2) It is recommended to use "MODE2" for handling fast video. *8 "SCAN" changes are not reflected in Anamo size display. IP mode "MODE1" performs IP conversion using inter-frame interpolation. The factory default is "MODE1". "MODE2" performs IP conversion using inter-field interpolation. Since interpolation is performed inside each field, this mode is suitable for checking interlace status. 27 Main Menu (continued) WB adjustment mode Select "VAR1" to "VAR3" for "COLOR TEMP. " in the "VIDEO CONFIG" menu to make "WHITE BALANCE VAR1" to "WHITE BALANCE VAR3" (WB) adjustments. Underlined values indicate factory defaults. Sub menu COLOR TEMP. *1 Settings USER0 - 6 D93 D65 D56 Description Selects the color temperature that will become the basis for adjustment. <USER 0 - 63> Adjustable settings 0 - 63 (equivalent to a color temperature range of 3, 000 - 9, 300K) <D93> Equivalent to a color temperature of 9, 300K <D65> Equivalent to a color temperature of 6, 500K <D56> Equivalent to a color temperature of 5, 600K USER20 is approximately 5000 K and USER33 is approximately 6300 K. [. . . ] · Do not directly expose the monitor to spray cleaning. Any moisture entering the monitor could damage it. Error Display When an error has occurred for some reason, the tally lamp notifies the error. Error display Inverter error The tally lamp flashes red at 1-second intervals. Symptom If a malfunction occurs in the inverter that controls backlight brightness, the backlight goes off and the screen turns black. [. . . ]