User manual PANASONIC LC-50

[. . . ] Never try to service it yourself. FCC INFORMATION (U. S. A. only) CAUTION: Changes or modification not approved by PANASONIC could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. [. . . ] Press the button to display the setting menu illustrated on the right. <APERTURE CONTROL> LEVEL CONTROL FREQ. sub menu reset : 00 :HIGH HOW TO USE "MAIN MENU" (cont'd) AREA MARKER: Controls ON/OFF and other settings of the MARKER SELECT, SAFETY MARKER, and ZOOM functions included in the AREA MARKER function. Press the button to display the setting menu illustrated on the right. <AREA MARKER> MARKER SELECT ZOOM ASPECT SELECT SAFETY MARKER R-MARKER SELECT R-ZOOM R-ASPECT SELECT R-SAFETY MARKER :LINE :ON : 4:3 : 80 :LINE :OFF : 13:9 : 80 EXIT: MENU ADJUST: ­ + SELECT: 7 LEVEL Adjusts the compensate value. The higher the number is, the larger the compensate value gets. · 00 ~ 10 7 CONTROL FREQ. Adjusts the frequency compensation. HIGH: Compensates the high frequencies. OFF : Deactivates the aperture compensation. NOTES: · For the 4:3 screen ratio, only SAFETY MARKER and RSELECT: EXIT: MENU ADJUST: ­ + SAFETY MARKER are displayed. · To set up non-"R-" items, press the AREA MARKER button on the front panel. An external control system should not be operated at this time. · To set up "R-" items, set the AREA MARKER function to ON via external control. · Use the MAKE/TRIGGER terminal for external control of AREA MARKER function. Please note that this will only work when the AREA MARKER button on the front panel has been pressed (the AREA MARKER lamp will be illuminated). For details, refer to "HOW TO USE THE MAKE/TRIGGER TERMINAL" on page 21. 7 MARKER SELECT/R-MARKER SELECT It displays the area of the aspect ratio that has been set in the ASPECT SELECT/R-ASPECT SELECT, superimposed on the current screen. OFF LINE HALF : MARKER SELECT does not function. Input Signal Format Standard setting ITU601 ITU709 ITU709 Manual setting (MANUAL) NTSC, PAL, 480/60i, 480/60p, 576/50i, 575/50p 720/50p, 720/60p, 1080/50i, 1080/60i, 1035/60i, 1080/24psF 15 7 "SET-UP MENU" SCREENS SET-UP MENU <SET-UP MENU> FUNCTION SETTING PICTURE SUB ADJ. STATUS DISPLAY CONTROL LOCK all reset EXIT: MENU ENTER: + HOW TO USE "SET-UP MENU" Setting Items Press . <FUNCTION SETTING> COLOR SYSTEM SYNC SELECT RUSH DELAY TIME TALLY SELECT REMOTE SYSTEM E. AUDIO GROUP HOUR METER X100h : AUTO : INT. : GREEN : MAKE : 1G : 000 : OFF SELECT: EXIT: MENU ADJUST: ­ + SELECT: <PICTURE SUB ADJ. > See page 20. CONTRAST BRIGHT CHROMA PHASE NTSC SETUP COMPO. LEVEL sub menu reset EXIT: MENU : 00 : 00 : 00 : 00 : 00 :SMPTE ADJUST: ­ + SELECT: <COLOR TEMP. /BAL. > COLOR TEMP. BLUE DRIVE RED DRIVE GREEN CUTOFF BLUE CUTOFF RED CUTOFF sub menu reset EXIT: MENU : LOW : 000 : 000 : MIN : MIN : MIN ADJUST: ­ + SELECT: Adjusts with and buttons. <SIZE/POSI. ADJ. > H. SIZE H. POSITION V. SIZE V. POSITION ZOOM H. SIZE ZOOM V. SIZE sub menu reset EXIT: MENU : : : : : : 00 00 00 00 00 00 See page 12 for more information on " sub menu" and "reset". ADJUST: ­ + SELECT: <DISTORTION ADJ. > PINCUSHION PIN. BALANCE PARALLELOGRAM TRAPEZOID ROTATION sub menu reset : : : : : 00 00 00 00 00 EXIT: MENU ADJUST: ­ + SELECT: <STATUS DISPLAY> STATUS DISPLAY : ON EXIT: MENU ADJUST: ­ + SELECT: * To go back the previous MENU, press MENU. 16 7 ITEM CONTENTS AND ADJUSTMENT RANGE/SETTINGS FUNCTION SETTING Selects the control systems for the COLOR SYSTEM, synchronized signal, RUSH DELAY TIME, tally lamp colors, and MAKE/TRIGGER terminal. · Checks the amount of time that the monitor has been used. · Selects the audio channel group for the EMBEDDED AUDIO. (When an input card compliant with EMBEDDED AUDIO is installed. ) 7 TALLY SELECT Selects the color of the tally lamp (when lit) on the upper front panel. GREEN : The tally lamp lights in green. RED : The tally lamp lights in red. 7 REMOTE SYSTEM Selects the control system for the MAKE/TRIGGER terminals. Refer to "HOW TO USE THE MAKE/ TRIGGER TERMINAL" on page 21. · MAKE (make contact)/TRIGGER (trigger contact) Press the button to display the setting menu illustrated on the right. <FUNCTION SETTING> COLOR SYSTEM SYNC SELECT RUSH DELAY TIME TALLY SELECT REMOTE SYSTEM E. AUDIO GROUP HOUR METER X100h : AUTO : INT. : GREEN : MAKE : 1G : 000 7 E. AUDIO GROUP Selects the audio channel group for EMBEDDED AUDIO. It is displayed when an input card compliant with EMBEDDED AUDIO is installed. · 1G/2G/1-2G 1G 2G : : 1ch 5ch 1ch EXIT: MENU ADJUST: ­ + SELECT: 7 COLOR SYSTEM Selects the color system when using the video input card. AUTO : Changes NTSC and PAL automatically. [. . . ] · If two or more monitors are operated next to each other, their images may shake or be distorted. This phenomenon is due to mutual interference; it is not a malfunction. Move the monitors away from each other until the interference disappears or turn the power off on any monitor that is not being used. Damper line DEGAUSS UNDER SCAN PULSE CROSS COLOR OFF SLOT 1 SLOT 2 SLOT 3 POWER A VOLUME MENU BLUE CHECK ASPECT AREA MARKER B C D E F INPUT SELECT · About CRT tube reflection (when Zoom mode is used. ) The screen might appear as brownish white. This is due to a reflection of part of the image on the CRT caused by certain signal sources, and it is not a malfunction. When black vertical lines appear on the screen Black vertical lines may appear on the screen if the aperture grill is tilted as a result of being shaken or jolted during shipment. MUTING DEGAUSS UNDER SCAN PULSE CROSS COLOR OFF SLOT 1 SLOT 2 SLOT 3 POWER MUTING DEGAUSS UNDER SCAN PULSE CROSS COLOR OFF SLOT 1 SLOT 2 SLOT 3 POWER MUTING DEGAUSS UNDER SCAN PULSE CROSS COLOR OFF SLOT 1 SLOT 2 SLOT 3 POWER A VOLUME MENU BLUE CHECK ASPECT AREA MARKER B C D E F VOLUME MENU BLUE CHECK ASPECT AREA MARKER A B C D E F VOLUME MENU BLUE CHECK ASPECT AREA MARKER A B C D E F INPUT SELECT INPUT SELECT INPUT SELECT In this case, try tapping the monitor on the side. [. . . ]