User manual PANASONIC LF1600A

[. . . ] â· As the eye cup cannot be removed, gently wipe it with a dry and soft cloth, and be careful not to remove it. â· If you wipe the eye cup too hard and it is removed, consult the dealer or your nearest Service Centre. â· Be sure to read the operating instructions of your digital camera. Condition it to the ambient temperature inside a bag etc. [. . . ] When not using the Live Viewfinder, be sure to keep it in its storage bag. Store in a dry place, taking care to avoid heat and humidity. â· Do not spray the camera with insecticides or volatile chemicals. If the camera is sprayed with such chemicals, the body of the camera may be damaged and the surface finish may peel off. â· Do not keep rubber or plastic products in contact with the camera for a long period of time. â· Do not disassemble or modify this unit. â· If nothing is displayed on the Live Viewfinder, or if the display is not normal, it may be due to the digital camera. Please have your digital camera serviced together with this unit. This Class B digital apparatus complies with Canadian ICES-003. This Live Viewfinder is designed only for the Panasonic digital camera DMC-GX1. Connectors may cause damage, so attach the connector protective cover and place it in the storage bag. Circuit different from that to which the receiver is connected. Any unauthorized changes or modifications to this equipment would void the user's authority to operate this device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. How to use C Maintained even when the power of the digital camera is turned [OFF]. Keep the unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games, radio transmitters, high-voltage lines etc. Do not use the camera near cell phones Because doing so may result in noise adversely affecting the pictures and sound. â· If the camera is adversely affected by electromagnetic equipment and stops functioning properly, turn the camera off and remove the battery and/or the connected AC adaptor. Then reinsert the battery and/or reconnect the AC adaptor and turn the camera on. [. . . ] Then reinsert the battery and/or reconnect the AC adaptor and turn the camera on. About the settings for recording with a low camera angle C Do not open beyond 90o. Doing so may cause Look at the display on the Viewfinder and rotate the diopter adjustment dial to where the screen is clearest. Other factors depending on the photographic environment may cause the screen to turn black temporarily; however this does not affect the saved image. [. . . ]