User manual PANASONIC LOGO TRANSFER SOFTWARE 2.0 FOR WINDOWS

[. . . ] Operating Instructions Logo Transfer Software 2. 0 Windows M1010KT0 -PS TQBH9021(E) Table of Contents Read This First. 3 The number of LOGOs, the maximum pixel size and colors you can register . . 3 Select a method to create the LOGO data . 18 If the LOGO data cannot be enlarged and edited in the projector . [. . . ] · The pixel size of the Bitmap which can be used for the LOGO data varies depending on the projector being connected . · The number of colors which can be used for the LOGO data varies depending on the projector being connected . If the number of colors used is over the usable range, the color is automatically decreased in the software . If you still have the CD-ROM for this software that is supplied with your projector, refer to "List of Software Restrictions" in the application launcher of the CD-ROM. You can also find the latest information under "List of Software Restrictions" on our website: http://panasonic. net/avc/projector/ ­ 16 ­ Load LOGO data From Projector When you select the "Load LOGO data From Projector", the following screen appears . After you select the LOGO to load, click the "OK" button . Select the LOGO data of the Projector Specify the LOGO data to load . Note · If your projector has only one location to register the LOGO data, you do not need to select the LOGO . · Time to load the LOGO data will be different for different projectors . The edit screen will appear after the LOGO data is loaded . (Go to page 18) CANCEL Return to the screen to select a method to create the LOGO data . Open LOGO data If you select the "Open LOGO data", the "Open file" dialog box appears, and select the file you want to open ( . dat) . After the file is loaded, the main screen to create the LOGO data appears. (Go to page 18) ­ 17 ­ Edit the LOGO data If the LOGO data can be enlarged and edited in the projector, it is possible to enlarge the LOGO data, change the display position and set the background and transparent color . If the LOGO data cannot be enlarged and edited in the projector, the LOGO data which has been loaded from the Bitmap is directly transferred . If the LOGO data can be enlarged or edited in the projector, go to page 21 . If the LOGO data cannot be enlarged and edited in the projector ­ 18 ­ If the LOGO data cannot be enlarged and edited in the projector (cont. ) SYSTEM menu · FileExit End this software . · LanguageEnglish You can change the display language of the software to English . · Language You can change the display language of the software to Japanese . · Language You can change the display language of the software to Chinese . · AboutVersion The version of the software is displayed . Note Messages on some screens such as "Open file" can be displayed in the language used in your computer regardless of the language setting . Preview Screen The display condition of the actual LOGO is displayed in the reduced-size images in the same way as the screen projected by the projector being connected . Open/Save The menu to load and save the LOGO data is displayed . The projector being connected The model name of the projector being connected now is displayed . Change the Target Projector Change the projector model to connect . (Go to page 27) ­ 19 ­ If the LOGO data cannot be enlarged and edited in the projector (cont. ) Create New LOGO data Load a new Bitmap . [. . . ] Have you logged off, changed user or shut down the computer in use?If there is no problem with the above items, please transfer the LOGO again . When ERROR1/ERROR9 appears again, please turn off the power of the projector firstly and then turn it on, so as to transfer the LOGO. Error code/Message Cause Solutions Error code/Message Cause Solutions Error code/Message Cause Solutions ERROR:10/Authentication failed The account name or password which has been entered is different from the one which has been set in the projector . [. . . ]