User manual PANASONIC LUMIX DMC-LX2

[. . . ] Operating Instructions Digital Camera Model No. DMC-LX2 Before use, please read these instructions completely. PL VQT0Y46-1 Before Use Dear Customer, We would like to take this opportunity to thank you for purchasing this Panasonic Digital Camera. Please read these Operating Instructions carefully and keep them handy for future reference. Information for Your Safety WARNING TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD AND ANNOYING INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES AND DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Carefully observe copyright laws. [. . . ] · The extra optical zoom and digital zoom cannot be used. · You cannot set quality to [RAW] in high sensitivity mode. Snow mode The exposure and the white balance are adjusted to make the white colour of the snow stand out. 1 19 67 VQT0Y46 Advanced Press [ SET ] to display the [SCENE MODE] menu and select a scene mode. (P61) n Birthday setting 1 Baby mode 1 1 Select [BIRTHDAY SET. ] and press 2 Baby mode 2 [MENU/SET]. This mode adjusts the exposure and tone 2 [PLEASE SET THE BIRTHDAY OF THE to bring out the healthy colour of your BABY] appears on the display. The flash will be weaker than year/month/day with w/q, then change normal if you choose to use it. You can set the birthdays of two babies by 3 Press [MENU/SET] to exit. · If you select [WITH AGE] but you haven't set the birthday, a message appears. Press [MENU/SET] and follow steps 2 1 19 and 3 to enter the birthday. 1 month 10days 10:00 DEC. 1. 2006 MENU · The baby's age appears when you are showing the picture later. · You can also use the [LUMIX Simple Viewer] or [PHOTOfunSTUDIO-viewer-] software on the included CD-ROM to print your baby's age. (For details, refer to the separate operating instructions for PC connection. ) n Age display setting · To show age, first enter the birthday, select [WITH AGE], and press [MENU/ SET]. · To not show age, select [WITHOUT AGE], and press [MENU/SET]. BABY1 WITH AGE WITHOUT AGE BIRTHDAY SET. CANCEL SELECT SET MENU · The focus range is 5 cm (Wide)/30 cm (Tele) to Z. · The ISO sensitivity is fixed to [ ISO ]. · The auto bracket setting is disabled. · The digital zoom is fixed to [OFF]. · After turning on the camera in [BABY1]/ [BABY2] in scene mode or switching to [BABY1]/[BABY2] from other scene modes, the age and current date and time are displayed for about 5 seconds at the bottom of the screen. · Actual age displays depend on the [LANGUAGE] setting. · The display style when printing may differ slightly from the display style on the screen. · The display on the actual day of your baby's birth will be 0 month 0 day. · Check the clock and birthday settings if the age shown is incorrect. · Note that if you have selected [WITHOUT AGE], age information will not be recorded for any pictures you take. [. . . ] (P19) When you take a picture before setting the clock, [0:00 0. Depending on the zoom magnification, the picture may have some coloured fringes around the subject. This is called chromatic aberration and may be more visible when recording distant subjects. Certain operations cause pictures to be saved in folders with different numbers. [. . . ]