User manual PANASONIC LUMIX DMC-G1W CARACTERISTIQUES TECHNIQUES

[. . . ] Operating Instructions Digital Camera/Lens Kit Model No. DMC-G1K Before use, please read these instructions completely. Web Site: http://www. panasonic-europe. com EB VQT1U44 until 2008/11/ 1 Before Use Dear Customer, We would like to take this opportunity to thank you for purchasing this Panasonic Digital Camera. Please read these Operating Instructions carefully and keep them handy for future reference. Before Use Information for Your Safety WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Carefully observe copyright laws. [. . . ] ([ISO400] when the flash is used) About [ ] (Intelligent ISO sensitivity control) The camera automatically sets the optimum ISO sensitivity and shutter speed to suit the movement of the subject and brightness of the scene to minimise the jitter of the subject. The shutter speed is not fixed when the shutter button is pressed halfway. It is continuously changing to match the movement of the subject until the shutter button is pressed fully. Confirm the actual shutter speed on the information display for the picture being played back. 80 VQT1U44 Advanced (Recording pictures) Note The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the amount of picture noise. Refer to P61 for the flash range. Depending on the brightness and how fast the subject is moving, jitter may not be avoided even if [ ] is selected. Movements may not be detected when a moving subject is small, when a moving subject is at the edge of the screen or when a subject has moved at the very moment when the shutter button was pressed fully. The setting is fixed to [ ] in the following cases. In [BABY1]/[BABY2] and [PET] in scene mode In [INDOOR PORTRAIT], [NORMAL SPORTS], [OUTDOOR SPORTS] and [INDOOR SPORTS] in advanced scene mode Programme shift cannot be activated when the ISO sensitivity is set to [ ]. You cannot select [ ] in shutter-priority AE mode and manual exposure mode. Also, you cannot select [AUTO] in manual exposure mode. To avoid picture noise, we recommend reducing the ISO sensitivity, setting [NOISE RED. ] in [FILM MODE] towards [_] or setting the items except [NOISE RED. ] towards [`] to take pictures. (P83) VQT1U44 81 Advanced (Recording pictures) [REC] mode: Change tone of the colour for the picture to be taken (Film mode) [You can only select [STANDARD] and [STANDARD] ( ) in [ ], [], [ ], [ ], [ ], [ ] and [ ] mode. ] Every type of film for film cameras has its own colour tone and contrast characteristics. In film mode, you can select the colour tone of the pictures from 9 types in the same way as you would select different films for film cameras. Select different settings in film mode to match the recording situation and your picture of the recording. Press [FILM MODE]. A [FILM MODE] button Press 2/1 to select an item. You can also use the front dial to select. When you press [DISPLAY] on the screen shown right, explanations about each film mode are displayed. (When you press [DISPLAY] again, the screen returns to the previous screen. ) Press [MENU/SET] to set. You can also press the shutter button halfway to set. Item [STANDARD] (COLOUR) [DYNAMIC] (COLOUR) [NATURE] (COLOUR) [SMOOTH] (COLOUR) [NOSTALGIC] (COLOUR) [VIBRANT] (COLOUR) [STANDARD] ( [DYNAMIC] ( [SMOOTH] ( ) ) ) Effect This is the standard setting. The saturation and contrast of the stored colours are increased. The contrast is lowered for smoother and clearer colour. Higher saturation and contrast than dynamic. Smooths the picture without losing the skin texture. It will take pictures changing the type of film in accordance with the setting every time the shutter button is pressed. (Up to 3 pictures) [MY FILM 1]/[MY FILM 2] [MULTI FILM] 82 VQT1U44 Advanced (Recording pictures) Note In film mode, the camera may do something equivalent to pull processing or push processing to create a picture with particular characteristics. The shutter speed may become very slow at this time. Adjusting each film mode to the desired setting You can also set from the quick menu. [. . . ] (P108) The AF assist lamp does not turn on in bright places. The surface of the camera and the reverse side of the LCD monitor may become warm during use. This does not affect the performance or quality of the camera. The clock is reset. If you do not use the camera for a long time, the clock may be reset. > When the message [PLEASE SET THE CLOCK] appears, set the clock again. [. . . ]