User manual PANASONIC MC-CG383

[. . . ] Do not handle plug or vacuum cleaner with wet hands. â· Do not use wet filters after wash, make sure they are completely dry to avoid damaging the cleaner. [. . . ] B-1 B-2 B-3 Insert the connection pipe into the hose inlet and turn the pipe to the right. Connect the two extension wands by inserting one into the other and twisting together. Insert the curved wand into the upper end of the telescopic wand, and the floor nozzle to the other end. What to do if your cleaner does not work check that the appliance is correctly plugged in and that the socket outlet is working. If the thermal cut-out device has operated, wait until it resets automatically after approximately 60 minutes. If after having checked the above mentioned points, the appliance does not work, take it to an Authorized Service Centre to be repaired. The plug must be removed from the socket outlet before cleaning or maintaining the appliance. â· DO NOT use hot air or hot surface to dry filters. Dry them at room temperature for approximately 24 hours. â· IMPORTANT: Before re-installing the washable filters, make sure they are completely dry to avoid damaging the appliance. NOTE: If the paper dust bag is not properly installed, the dust cover will not close. Be sure to check that the paper dust bag is properly installed before operating the appliance, otherwise dust will leak out. The paper dust bag can easily lay on the dust cover packing or clip between the bag collar and the body, so be sure to properly extend it into the body of the appliance. What to do when the suction performance reduces Check whether the wands, hose and accessories are blocked or not. [. . . ] For proper treatment, recovery and recycling, please take these products to designated collection points, where they will be accepted on a free of charge basis. Alternatively, in some countries you may be able to return your products to your local retailer upon the purchase of an equivalent new product. [. . . ]