User manual PANASONIC MJ66PR

[. . . ] RealD is one of the inventors in 3D technology. DVB-T tuner built-in Receives DVB (Digital Video Broadcasting) digital terrestrial broadcasts. DVB-T2 tuner built-in DVB-T2 is an advanced digital terrestrial system for more efficient transmission. Available DVB-T2 broadcasts will be tuned automatically when you perform DVB Auto Setup. [. . . ] Note that Guide link programming (including Split Programme programming) only works reliably if correct information is received from broadcasters. To edit a timer programming event Select the event Timer Programming To change a timer programming event Correct as necessary (p. 54) To delete a timer programming event (red) To record with subtitles (if available) · Each time pressed: (yellow) auto off To cancel a timer programming event temporarily · Each time pressed: (blue) stop cancelling cancel To unlock the tuner and stop recording To view details of the programming (only for Guide link programming) Select the programme Press again to return to Timer Programming menu. Note Check that the LED is orange. If not, timer programming events are not active or not stored. Timer Programming reminder messages will remain displayed until one of the following occurs: · You press the OK button to view the programme or the EXIT button to cancel the reminder. · The timer programming event that the reminder is set for ends. "!" identifies that two or more timer programming events are overlapped. [Ext Rec. ] is given priority over [Reminder]. As for the overlapped recording events, the first event starts and finishes as programmed. The recording of Timer Programming will automatically change to the programmed channel a few seconds before the start time. To stop recording the timer programming event, it may be necessary to stop the recorder manually. The recording of Timer Programming will be performed even if the TV is in [Pause Live TV] recording (p. Video and audio signals may not be output depending on broadcasts or services. Caution Turn off Mains power On / Off switch whenever inserting or removing the CI module. If a view card and a card reader come as a set, first insert the card reader, then insert the view card into the card reader. Insert the module in the correct direction. Side of the TV CI slot Insert or remove completely CI module Insert the CI module (optional) The features that appear on screen are dependent on the contents of the selected CI module. Follow the instructions that came with the viewing card to tune in the encrypted channels. If encrypted channels do not appear, perform the below to verify the card is recognised by the TV. For more details, read the manual of the CI module, or check with the broadcaster. 1 2 Select DVB (p. 21) Display the menu and select [Setup] select Setup access 3 Select [System Menu] Using Common Interface select System Menu Access access 4 Select [Common Interface] select Common Interface Access access 5 Access Common Interface and follow the on-screen instructions Common Interface Slot 1: Module inserted On-screen instructions may not correspond to the remote control buttons. 59 Updating the TV Software A new version of software may be released for download to enhance the performance or operations of the TV. In DVB mode, a notification banner will appear when one of the BBC channels is turned to if a new available software is found. To download (Press the EXIT button not to download) You can update new software automatically or update manually. 1 Display the menu and select [Setup] select Setup access 2 Select [System Menu] select System Menu Access access 3 Select [System Update] System Menu System Update Access select access Updating the TV Software Update TV's software system [System Update] To update automatically System Update Auto Update Search in Standby Off System Update Search Now Select [Auto Update Search in Standby] select access / store Automatically performs a search in standby and downloads an update, if any software updates are available. The automatic updating is performed at night under the following conditions: · Standby (TV turned off with the remote control) · Recording of Timer Programming or Direct TV Recording is not in progress. If System Update is performed, the software will be updated (it may change TV functions). [. . . ] UHF E21 - 68 Playback of NTSC tape from some PAL Video recorders (VCR) or NTSC disc playback from DVD player and recorder. Playback from M. NTSC Video recorders (VCR). Playback from NTSC Video recorders (VCR). VHF A - J CATV S1 - S20 UHF E21 - E69 CATV S21 - S41 (Hyperband) Specifications Receiving systems / Band name Check the latest information on the available services at the following website. [. . . ]