User manual PANASONIC MKG20NR

[. . . ] · When carrying the unit, be sure to hold the motor housing with both hands; do not hold only the hopper plate. · Do not grind hard foods such as bones and nuts. (They may cause jamming. ) · Do not grind ginger and other materials with hard fiber. [. . . ] (They may cause jamming. ) · Do not grind ginger and other materials with hard fiber. (They will not be ground. ) · To avoid jamming, do not force to operate the unit with excessive pressure. If the unit jams due to hard materials lodged onto the feed screw or the cutting blade, switch off immediately and clean the unit. When the circuit breaker activates, do not switch on. (See "Caution on Jamming" on page 7. ) · Never try to disassemble or repair the unit by yourself. · If the supply cord is damaged, it must be replaced by a special cord or a cord assembly available from your Panasonic dealer or its service agent. · Never remove or attach the hopper plate, the head or cap when the motor is operating. To remove the cutting plate easily, place a screwdriver between the cutting plate and the 8 head as illustrated and lift up. Do not immerse the motor housing in water; simply wipe it with a damp cloth. A little salad oil on h, i after washing and drying will keep them lubricated. Note: · A bleaching solutuion containing chlorine will discolor the aluminum surface. · Thinners and benzines will crack or change the color of the unit. · Do not wash any parts in a dishwasher. (It may discolor the aluminum surface. ) · Leaving the parts ~ l and f, g, m wet after j cleaning may cause corrosion. [. . . ] · Do not wash any parts in a dishwasher. (It may discolor the aluminum surface. ) · Leaving the parts ~ l and f, g, m wet after j cleaning may cause corrosion. Wipe off thoroughly with a dry cloth after cleaning. [. . . ]