Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual PANASONIC NI-W920. We hope that this PANASONIC NI-W920 user guide will be useful to you.
Lastmanuals help download the user guide PANASONIC NI-W920.
Detailed instructions for use are in the User's Guide.
[. . . ] When flakes come out of the soleplate during ironing), use the Calc-Clean function more frequently. 1 Make sure the appliance is unplugged and the steam control is set to t (dry ironing). ¯2) 2 Fill the water tank to the MAX indicationâ¯(Fig. Do not pour vinegar or other descaling agents into the water tank. [. . . ] 4 Unplug the iron when the temperature light goes out. Push the steam control to the Calc-Clean position and hold itâ¯(Fig. 6 Gently shake the iron until all water in the water tank has been used upâ¯(Fig. Caution: While scale is flushed out, steam and boiling water also come out of the soleplate. 7 Set the steam control back to t (dry ironing). ¯2) Note: Repeat the Calc-Clean process if the water that comes out of the iron still contains scale particles. After the Calc-Clean process 1 Plug in the iron. Let the iron heat up to let the soleplateâ¯dry. 2 Unplug the iron when the temperature light goes out. 3 Move the iron gently over a piece of cloth to remove any water stains on the soleplate. 4 Let the iron cool down before you store it. To let the iron heat up again, pick up the iron or move it slightly until the auto-off light goes out. ECO steam setting -Select the ECO steam setting instead of the maximum steam setting ; to save energy, yet to achieve satisfactory ironing results. ¯11) Dry ironing -Set the steam control to t (dry ironing) to iron without steam. ¯2) Flakes and impurities come out of the soleplate during ironing. Water drips from the soleplate after the iron has cooled down or has been stored. Water leaks from the cap of the filling opening. When I push the steam control to the turbo steam position, the steam control jumps back. Theâ¯steam boostâ¯function does not work properly (water leaks out of the soleplate). You have put an additive in the water tank. You have used the steam boost functionâ¯too often within a very short period. You have used the steam boost function at a too low temperature. [. . . ] You have used the steam boost function at a too low temperature. hard water forms flakes inside the soleplate. You have put the iron in horizontal position while there was still water in the water tank. You did not keep the steam control in the turbo steam position. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PANASONIC NI-W920
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual PANASONIC NI-W920 will begin.
