User manual PANASONIC NIH20NR

[. . . ] RealD is one of the inventors in 3D technology. DVB-T tuner built-in Receives DVB (Digital Video Broadcasting) digital terrestrial broadcasts. DVB-T2 tuner built-in DVB-T2 is an advanced digital terrestrial system for more efficient transmission. Available DVB-T2 broadcasts will be tuned automatically when you perform DVB Auto Setup. [. . . ] For more details, read the manual of the CI module, or check with the broadcaster. 1 2 Select DVB (p. 21) Display the menu and select [Setup] select Setup access Using Common Interface 3 Select [System Menu] select System Menu Access access 4 Select [Common Interface] select Common Interface Access access 5 Access Common Interface and follow the on-screen instructions Common Interface Slot 1: Module inserted On-screen instructions may not correspond to the remote control buttons. 59 Updating the TV Software A new version of software may be released for download to enhance the performance or operations of the TV. In DVB mode, a notification banner will appear when one of the BBC channels is turned to if a new available software is found. To download (Press the EXIT button not to download) You can update new software automatically or update manually. 1 Display the menu and select [Setup] select Setup access 2 Select [System Menu] select System Menu Access access 3 Select [System Update] System Menu System Update Access select access Updating the TV Software Update TV's software system [System Update] To update automatically System Update Auto Update Search in Standby Off System Update Search Now Select [Auto Update Search in Standby] select access / store Automatically performs a search in standby and downloads an update, if any software updates are available. The automatic updating is performed at night under the following conditions: · Standby (TV turned off with the remote control) · Recording of Timer Programming, Direct TV Recording or One Touch Recording is not in progress. If System Update is performed, the software will be updated (it may change TV functions). If you do not want to do so, set [Auto Update Search in Standby] to [Off]. The notification banner will keep appearing during the period of new software availability, usually 2 to 3 days. To update immediately 1 Select [System Update Search Now] System Update Auto Update Search in Standby Off System Update Search Now Access 2 Searches for an update (for select access several minutes) and displays a corresponding message if any 3 Download Note Download may take up to 60 minutes. During software download and update, DO NOT perform any operations on the TV or switch Off the TV. 60 Displaying PC Screen on TV The screen of the PC connected to the TV can be displayed on the TV. You can also listen to PC sound with the audio cable connected. 93) 1 2 Select the external input Select [PC] Input Selection AV1 AV2 PC HDMI1 HDMI2 HDMI3 HDMI4 TV SD Card/USB select access Corresponding signals (p. 102) If [H-freq. ] or [V-freq. ] is shown in red, the signals may not be supported. PC menu setting To make settings "How to Use Menu Functions" (p. Prepare the USB HDD for the exclusive use of recording with this TV. Select [USB HDD Setup] and set Recording Setup USB HDD Setup Access select access 63 Setup the USB HDD [USB HDD Setup] All the USB devices recognised as a mass storage device will be listed. You can only choose one USB HDD for recording at a time. You cannot change the settings for the USB HDD while recording is in progress. Please note that USB HDD will be formatted and all data in it will be erased after this setup. 1 Select the USB HDD for recording and start setup USB HDD Setup Product USB Drive A USB Flash Disk Name select access Some USB HDD may not be displayed. For the information of the highlighted device 2 Caution and confirmation of using USB HDD Select [Yes] to proceed USB HDD Formatting The data recorded to the USB HDD with this TV can only be played back on this TV. You cannot playback it with other TV (including the TV of the same model number) or any PCs. If your TV is repaired due to a malfunction, the USB HDD may not be available with your repaired TV. Continue? USB HDD Formatting To use this device for recording, it must be formatted first. Continue? USB HDD Formatting This device will be formatted and all contents deleted. Are you sure? Yes No Yes No Yes No select [Yes] set select [Yes] set select [Yes] set 3 Confirmation of USB HDD name USB HDD Formatting Name : USB Drive A Edit name? select set No Yes The name for the USB HDD is created automatically. [. . . ] Playback from NTSC Video recorders (VCR). VHF A - J CATV S1 - S20 UHF E21 - E69 CATV S21 - S41 (Hyperband) Receiving systems / Band name Check the latest information on the available services at the following website. http://panasonic. jp/ support/global/cs/tv/ M. NTSC NTSC (AV input only) DVB-T PAL I PAL 525/60 M. NTSC NTSC (AV input only) Specifications Playback of NTSC tape from some PAL Video recorders (VCR) or NTSC disc playback from DVD player and recorder. Playback from M. NTSC Video recorders (VCR). [. . . ]