User manual PANASONIC NIR20NR

[. . . ] If any foreign object is adhered to the inner side of the side door, remove with the supplied brush. If any liquid such as water droplets is adhered to the camera or inner side of the side door, wipe off with a soft dry cloth. Do not open or close the side door near the water, when underwater, using wet hands, or when the camera is wet. It may cause water leakage. Do not apply strong shock or vibration by dropping or knocking the camera. [. . . ] [ [ ]: ]: MPOiFine (Both MPO images and fine JPEG images are recorded simultaneously. ) [Hi-Speed Burst] or [Flash Burst] in Scene Mode. MPOiStandard (Both MPO images and standard JPEG images are recorded simultaneously. ) - 99 - Recording [Sensitivity] For details on [Rec] Mode menu settings, refer to P44. This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher number enables pictures to be taken even in dark places without the resulting pictures coming out dark. Applicable modes: [AUTO]/[ ]/[100]/[200]/[400]/[800]/[1600] [100] Recording location (recommended) Shutter speed Noise When it is light (outdoors) Slow Less Increased Settings The ISO sensitivity is automatically adjusted according to the brightness. The ISO sensitivity is adjusted according to the movement of the subject and the brightness. The ISO sensitivity is fixed to various settings. [1600] When it is dark Fast Increased Less Jitter of the subject ISO sensitivity AUTO maximum [400] (With the flash on [1600]) maximum [1600] (Intelligent) 100/200/400/800/1600 About [ ] (Intelligent ISO sensitivity control) The camera detects movement of the subject and then automatically sets the optimum ISO sensitivity and shutter speed to suit the movement of the subject and brightness of the scene to minimise the jitter of the subject. The shutter speed is not fixed when the shutter button is pressed halfway. It is continuously changing to match the movement of the subject until the shutter button is pressed fully. Note For the focus range of flash when [AUTO] is set, refer to P60. The setting is fixed to [ ] in the following cases. In [Baby1]/[Baby2], [Pet] and [Flash Burst] in Scene Mode [Sports] The setting is fixed to [AUTO] when recording motion pictures. - 100 - Recording [White Balance] For details on [Rec] Mode menu settings, refer to P44. The White Balance fine adjustment level in [] returns to [0] when you reset the White In the [Beach & Snorkeling] or [Underwater] Mode, the White Balance is fixed at [AWB], but it White Balance fine adjustment cannot be set for [B/W], [SEPIA], [COOL] and [WARM] in [Color Mode]. Balance using []. - 102 - Recording [AF Mode] For details on [Rec] Mode menu settings, refer to P44. This allows the focusing method that suits the positions and number of the subjects to be selected. Applicable modes: [s]: Face Detection The camera automatically detects the person's face. The focus and exposure can then be adjusted to fit the face no matter what portion of the picture it is in. 15 areas) Focus can be adjusted to a specified subject. Focus will keep on following the subject even if it moves. (Dynamic Tracking) [ [ ]: AF Tracking ]: 23-area-focusing Up to 23 points for each AF area can be focused. This is effective when the subject is not in the centre of the screen. (AF area frame will be same as image aspect ratio setting. ) The camera focuses on the subject in the AF area on the centre of the screen. The camera focuses on a limited narrow area in the screen. []: 1-area-focusing []: Spot-focusing [] will be used during Motion Picture Recording. Note It will be fixed to [s] when the [Face Recog. ] is set to [ON]. [. . . ] > When zooming, you can feel some vibration (this is caused by the lens moving). - 184 - Others The lens clicks. When the brightness changes due to zoom or camera movement etc. , the lens may click and the picture on the screen may drastically change. The sound is caused by the automatic adjustment of the aperture. This is not a malfunction. The clock is reset. [. . . ]