User manual PANASONIC NV-DS30EGE

[. . . ] To reduce the risk of fire, electric shock or product damage, do not expose this equipment to rain, moisture, dripping or splashing and ensure that no objects filled with liquids, such as vases, shall be placed on the equipment. Movie Camera The rating plate is on the underside of the Movie Camera. AC Adaptor The rating plate is on the underside of the AC Adaptor. If a new plug is to be fitted, please observe the wiring code as shown below. [. . . ] 3 Connect the supplied USB Cable 1 to [USB] Socket. The USB Connection Kit can be used with Windows98 Second Edition/Me/2000/XP. Use the AC Adaptor as power source for the Movie Camera. (The Card or its contents may be destroyed if battery power is lost while transmitting data. ) Mode cannot be changed in PC connection mode by setting the [VCR/OFF/CAMERA/M-CARD] Switch. For more details on the operating environment, installation, connections, and procedures, please refer to USB Connection Kit's operating instructions. 45 Others Indications Various functions and the Movie Camera status are shown on the screen. Some Indications may not be displayed according to the model. r: Remaining Battery Power When the battery power becomes low, the Indication changes. When the battery is discharged completely, the u (v) Indication flashes. R0:45: Remaining Tape Time Remaining tape time is indicated in minutes. (When it reaches less than 3 minutes, the indication starts flashing. ) CINEMA: Cinema Mode (l 25) D. ZOOM: Digital Zoom (l 23) P-IN-P: Picture in Picture Mode (l 30) WIPE: Wipe Mode (l 30) MIX: Mix Mode (l 30) STROBE: Strobe Mode (l 30) GAIN UP: Gain-up Mode (l 30) TRAIL: Trailing Effect Mode (l 30) MOSAIC: Mosaic Mode (l 30) MIRROR: Mirror Mode (l 30) SLIM: Slim Mode (l 30) STRETCH: Stretch Mode (l 30) SEPIA: Sepia Mode (l 36) B/W: Black & White Mode (l 36) ZOOM: Playback Digital Zoom (l 36) SP: Standard Mode (Recording Speed Mode) (l 21) LP: Long Play Mode (Recording Speed Mode) (l 21) INDEX: Index signal recording (l 35) S 1: Search Number (l 35) 5k: Zoom Magnification Indication (l 23) AUTO: Automatic Mode (l 20) MNL: Manual Mode (l 27, 28, 29) [: Image Stabilizer (l 24) 12 bit, 16 bit: Audio Recording Mode (l 21) MF: Manual Focus (l 29) ª: Back Light Mode (l 25) 5: Sports Mode (Programme AE) (l 26) 7: Portrait Mode (Programme AE) (l 26) Low Light Mode (Programme AE) (l 26) : Spotlight Mode (Programme AE) (l 26) º: Surf & Snow Mode (Programme AE) (l 26) REC: Recording (l 20) PAUSE: Recording Pause (l 20) !: Playback (l 32) ;: Still Playback (l 34) %: Fast-forward/Cue Playback (l 33) &: Rewind/Review Playback (l 32) ~, }: Slow Motion Playback (l 33) ";, ;!: Still Advance Playback (l 34) SEARCH: Index Search (l 35) CHK: Recording Check (l 20) A. DUB !: Audio Dubbing (l 37) A. DUB ;: Audio Dubbing Pause (l 37) PHOTO: Photoshot Mode Recording (l 22) BLANK: Blank Search (l 34) 2k%: Variable Speed Search (l 33) 1/500: When you adjust shutter speed manually, this indication appears. (l 28) F2. 4: When you adjust the F Number manually, this indication appears. In this case, remove the DV Interface Cable from the Movie Camera. DISCONNECT USB CABLE: If you are attempting to record from a Cassette by pressing the PHOTO SHOT Button when the USB Cable is connected, "DISCONNECT USB CABLE" appears. In this case, remove the USB Cable from the Movie Camera. PICTURE (Blink during 3 seconds): When making DV connection at the time of M-CARD mode. WEBCAM (Blink during 3 seconds): When making DV connection at the time of Web Camera mode. STORAGE (Blink during 3 seconds): When making DV connection at the time of USB Device Drive/SD Drive. Notes and Hints ª Selecting Remote Controller Modes When 2 Movie Cameras are used simultaneously, they can be operated individually by selecting different Remote Controller Modes. If the Remote Controller Mode of the Movie Camera and that of the Remote Controller do not match, [REMOTE] Indication is displayed. Setup on the Movie Camera: Set [REMOTE] on the [OTHER FUNCTIONS] Sub-Menu to the desired Remote Controller Mode. (l 16) Setup on the Remote Controller: [VCR1]: Press the [D] Button and [] Button simultaneously. [VCR2]: Press the [E] Button and [] Button simultaneously. When the battery in the Remote Controller is replaced, the mode is automatically reset to [VCR1] Mode. ª Concerning the Power Supply When the Movie Camera is used for a long time, the Camera body becomes warm, but this is not a malfunction. [. . . ] 26 Spotlight Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Still Advance Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Stretch Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Strobe Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]