User manual PANASONIC NV-DS37B

[. . . ] Be sure to try out the Movie Camera before recording your first important event and check that it records properly and functions correctly. the manufacturer is not liable for loss of recorded contents. The manufacturer shall in no event be liable for the loss of recordings due to malfunction or defect of this Movie Camera, its accessories or cassettes. Recording of pre-recorded tapes or discs or other published or broadcast material for purposes other than your own private use may infringe copyright laws. [. . . ] Erasing the Multi-Pictures One by One While still pictures are displayed, press the [MULTI] Button for more than 1 second. Keeping the [MULTI] Button pressed erases the pictures continuously. After you have erased the still pictures one by one, it is not possible to display them again. Playing Back with Special Effects With this function, you can automatically capture up to 9 small still pictures of scenes or Photoshot still pictures marked with index signal and display them together on the same screen. This lets you put together an assortment of different scenes or still pictures in a single picture. Turn the [PUSH] Dial to select [MULTIPICTURES] and then press the [PUSH] Dial. Turn the [PUSH] Dial to select [SCAN MODE] and then press the [PUSH] Dial to select [PHOTO] or [SCENE]. 9 pictures marked with index signals are captured in forward direction from the tape position at which the [MULTI] Button was pressed, and the tape then stops. (If there are less than 9 pictures marked with index signals, the tape stops at its end. There Are Two Different Types of Index Signals: In Step 3 above, select [PHOTO] or [SCENE] as follows: [PHOTO]: To search for still pictures marked with photoshot index signal and capture and display them. [SCENE]: To search for scenes marked with scene index signal and capture and display them as still pictures. When you stop playback, the position of the part of the picture to be enlarged is automatically reset to the center. In the Playback Zoom Mode, it is not possible to adjust the sound volume. Turning the Movie Camera off automatically cancels the Playback Zoom Mode. Even while you are using the Playback Zoom Function, the picture output from the DV Terminal (l 8) and the Digital Still Picture Terminal (l 79) is not enlarged. The more the picture is enlarged, the more its picture quality deteriorates. if you press the [MULTI] Button in the Playback Zoom Mode , the zoom magnification becomes 1t. It is not possible to use the Mirror Mode of the Digital Effects and the Playback Zoom Function at the same time. You can add music or narration on a recorded cassette. if [AUDIO REC] on the [OTHER FUNCTIONS] Sub-Menu of the [CAMERA FUNCTIONS] Main-Menu has been set to [16bit] , performing audio dubbing erases the previously recorded sound. (If you intend to perform audio dubbing but also want to keep the original sound, be sure to set [AUDIO REC] to [12bit] before making the original recording. ) It is not possible to perform audio dubbing onto recordings made in the LP Mode. [. . . ] (l 29, 30) I want to play back the picture on a TV. If you attach the Output Terminal Box [AV ONE TOUCH STATION] to the Movie Camera, you can connect the Movie Camera to a TV. Carefully read the operating instructions for your TV and select the channel that matches the input sockets used for connection. The playback picture is not reproduced clearly. [. . . ]