User manual PANASONIC NV-DS55EG

[. . . ] Before use, please read these instructions completely. As this equipment gets hot during use, operate it in a well-ventilated place; do not install this equipment in a confined space such as a bookcase or similar unit. Carefully read the Operating Instructions and use the Movie Camera correctly. Injury or material damage resulting from any kind of use that is not in accordance with the operating procedures explained in these Operating Instructions are the sole responsibility of the user. [. . . ] If more than 9 still pictures are recorded on the MultiMediaCard, turn the [PUSH] Dial to display the next 9 pictures. (Instead of the [PUSH] Dial, you can also use the [SEARCH_] Button or the [`SEARCH] Button. ) When you play back a blank (unrecorded) MultiMediaCard, the screen becomes white and the [``] Indication appears. If you attempt to play back a still picture recorded in a different format or a picture whose image data is defective, the [k] Indication and the [CARD ERROR] Indication could appear as warning. When the still pictures are displayed in the Multi-Picture Mode, the Slide Playback cannot be activated. You can use the Movie Camera to erase the still pictures recorded on the MultiMediaCard. After erasing them, the pictures cannot be recovered any more. Turn the [PUSH] Dial to select the picture that you want to erase, and then press it. Turn the [PUSH] Dial to select [YES] and then press it. The selected picture is now erased from the MultiMediaCard. If you select [NO], the picture selection is cancelled. Turn the [PUSH] Dial to select [YES] and then press it. All pictures stored on the MultiMediaCard are now erased. If the MultiMediaCard can no longer be read by the Movie Camera, it may be possible to make it usable again by formatting it. After formatting, the previously recorded pictures cannot be recovered any more. Turn the [PUSH] Dial to select [YES] and then press it. When the formatting has finished, the screen becomes white. We recommend that you use the AC Adaptor as power source when you format the MultiMediaCard to ensure uninterrupted power supply during formatting. File Numbering System When you record still pictures on the MultiMediaCard, the Movie Camera sequentially assigns file numbers which are automatically recorded together with each picture. However, when you use several MultiMediaCards or erase pictures, the numbers on a MultiMediaCard may no longer be in sequence. The file numbers can be confirmed if you import the pictures into the computer. If you want to record the pictures with file numbers starting from 0001, format the MultiMediaCard and then reset the file numbers. [. . . ] (l 64) The original sound was erased by performing audio dubbing. If you perform audio dubbing on a recording made in the [16bit] Mode (l 63), the original sound is erased. If you want to keep the original sound, be sure to select the [12bit] Mode for the original recording. S4-1: Is [12bit AUDIO] on the [OTHER FUNCTIONS] SubMenu of the [VCR FUNCTIONS] Main-Menu set to [ST2] even though no audio dubbing has been performed on the cassette that you are playing back? [. . . ]