User manual PANASONIC NV-DX110B

[. . . ] Recording of pre-recorded tapes or discs or other published or broadcast material for purposes other than your own private use may infringe copyright laws. Even for the purpose of private use, recording of certain material may be restricted. The Movie Camera uses copyright-protected technologies and is protected by the patented technologies and intellectual properties of Japan and the U. S. To use these copyright-protected technologies, authorization of the Macrovision Company is required. [. . . ] We recommend that you use this equipment to format the Card. Playing Back on Your TV By connecting your Movie Camera with your TV, the recorded scenes can be viewed on your TV screen. Before connecting them, turn off the power of both the Movie Camera and TV. 1 Connect the [AV IN/OUT] Socket of the Movie Camera and the Video and Audio Input Sockets of the TV. [S-VIDEO IN] [VIDEO IN] [AUDIO IN] 2 1 AV IN/OUT PHONES/ MIC REMOTE Connect to the TV with the AV Cable 1, make a connection with the TV. If the TV has an S-Video Socket, connect the S-Video Cable 2, too. When plugging the pin plug of the AV cable into the [AV IN/OUT] Socket, plug it in as far as it goes. To Make the Indications Appear on the TV Screen Press the [OSD] Button (52) on the Remote Controller. (52) OSD DATE/ TIME PHOTO SHOT START/ STOP DISPLAY RESET TITLE ZOOM For other notes concerning this item, see -52-. -39- Editing Mode Editing Mode Recording from a Tape onto a Card (NV-GS15 only) Still pictures can be recorded on the Memory Card from scenes that have already been recorded on a cassette. 1 Set the Mode Dial (39) to Tape Playback Mode. When recording to tape, select the tape position before recording. The picture will be recorded to the tape position when the [PHOTO SHOT] Button is pressed at Step 3. Photoshot index signals are automatically recorded. For other notes concerning this item, see -52-. Audio Dubbing You can add music or narration to the recorded Cassette. If the tape recorded in the [16bit] Mode is dubbed with the Audio Dubbing function, the original sound is erased. (If you wish to preserve the original sound, use the [12bit] Mode when recording. ) Audio Dubbing cannot be performed on a recording made in LP Mode. Or while pressing the [REC] Button (6), press the [BACK LIGHT] Button (12) on the Movie Camera. sVOL r Recorder: 3 While pressing the [¥REC] Button (55), press the [1] Button (73) on the Remote Controller. Or while pressing the [REC] Button (6), press the [BACK LIGHT] Button (12). Recording starts. To Stop Dubbing Press the [;] Button (70) or the [] Button (71). For other notes concerning this item, see -52-. MULTI/ P-IN-P V T ¥REC A. DUB FF/W (55) W (73) (70) (71) /REW PLAY 6 1 5 STILL ADV PAUSE STILL ADV E INDEX K ; STOP D INDEX L P. B. ZOOM When Recording on a card, press the [PHOTO SHOT] Button. (NV-GS15 only) 5 Press the [;] Button (70) or [] Button (71) to stop recording. Other Equipment: 6 Press the Stop Button to stop playback. For other notes concerning this item, see -52-. Using the DV Cable for Recording (Digital Dubbing) By connecting this Movie Camera to other digital video equipment that has a DV Input/Output Terminal with a DV Cable VW-CD1E (optional) 1, dubbing can be done in the digital format. 1 Player/Recorder: 1 Insert the Cassette and set to Tape Playback Mode. -42- With a PC With a PC Importing still pictures onto a PC (NV-GS15 only) Using the supplied USB Connection Kit, you can import still pictures onto your personal computer. Do not connect the USB Cable until the USB Driver is installed. 2 Set the Mode Dial (39) to PC Mode. When using with DV STUDIO: Set [CAMERA] or [PLAYBACK] >> [USB FUNCTION] >> [DV STUDIO]. (20) It enters WEB CAMERA Mode or DV STUDIO Mode. 4 Connect the supplied USB Cable to [ Socket (28). ] (39) 3 Connect the supplied USB Cable to [ Socket (28). PC connection mode is activated. ] (28) 5 Start the Windows Messenger or DV STUDIO. [. . . ] 2) Recording a subject behind dirty or dusty glass Because the focus is on the dirty glass, the subject behind the glass will not be focused. 3) Recording a subject in dark surroundings Because the light information that comes through the lens decreases considerably, the Movie Camera cannot focus correctly. 4) Recording a subject that is surrounded by objects with glossy surfaces or by highly reflective objects Because the Movie Camera focuses on the objects with glossy surfaces or on highly reflective objects, the recording subject may become blurry. Using the RESET button 1 Open the LCD Monitor. (-13-) 2 Undo Grip Belt end 1 and pull Lens Cap Cord 2 downward to loosen Grip Belt. 2 the [RESET] Button 4. 1 3 Use projection 3 on the Lens Cap to press 4 3 -58- Others 5) Recording a fast-moving subject Because the focus lens-inside moves mechanically, it cannot keep up with the fast-moving subject. [. . . ]