User manual PANASONIC NV-EX1B

[. . . ] AC Adaptor The rating plate is on the underside of the AC Adaptor. As this equipment gets hot during use, operate it in well ventilated place; do not install this equipment in a confined space such as a bookcase or similar unit. ª IMPORTANT The wires in this mains lead are coloured in accordance with the following code: Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal in the plug which is marked with the letter L or coloured RED. Under no circumstances should either of these wires be connected to the earth terminal of the three-pin plug, marked with the letter E or the Earth Symbol Ó. Caution for AC mains lead For your safety, please read the following text carefully. [. . . ] You can set up a Slide Show or change the content. 1 1, 6, 7 8 To Select Pictures to Play Back in Your Slide Show 1 After set the [PICTURE/MPEG4/VOICE] Switch to [PICTURE], set [CARD FUNCTIONS] >> [CARD EDITING] >> [SLIDE SHOW] >> [YES]. Slide Show editing screen appears. 2 Set [EDIT] >> [YES]. 3 Turn the [PUSH] Dial to select a picture and then press the dial. 4 Turn the [PUSH] Dial to select playback order and then press the dial. This step is skipped when there is no picture that has set for the Slide Show. 5 Turn the [PUSH] Dial to adjust the playback time and then EDIT press the dial. The Playback Order Indication 1 and the Playback Time (Second) Indication 2 appear. The [¥] Indication 3 is displayed to the picture set. To select the next picture, repeat the Steps 3 to 5 above. 640 1200 640 3 640 640 1200 PRESS MENU TO No. 5 9SEC RETURN 1 2 6 Press the [MENU] Button to end the setup. 7 After set [SLIDE SHOW] >> [PRESET], press the [MENU] Button. 4 M. SLIDE 8 Press the [1] Button. The [M. SLIDE!] Indication is displayed. 4 To Play Back All the Pictures Continuously After setting the [SLIDE SHOW] to [ALL], press the [1] Button. 5 All pictures are played back for approximately 6 seconds each, from the first to the last recorded picture, and playback then stops. SLIDE 5 SLIDE 6 To Pause the Slide Show Press the [;] Button. The [(M. ) SLIDE;] Indication is displayed. 6 To Stop the Slide Show Press the [] Button. To Verify the Selected Picture Set [CARD FUNCTIONS] >> [CARD EDITING] >> [SLIDE SHOW] >> [YES] >> [VERIFY] >> [YES]. Only the selected pictures are displayed in Multi-Picture Mode in the Playback order. 1 Set [CARD FUNCTIONS] >> [CARD EDITING] >> [SLIDE SHOW] >> [YES]. To Delete the Selected Picture 2 Set [DELETE] >> [YES]. 3 Select the picture you want to delete and press the [PUSH] Dial. Press the [PUSH] Dial again to cancel. FILE LOCK 640 640 640 The Lock Setting carried out by this Movie Camera is only effective for this Movie Camera. 640 640 640 1 EXIT About write protection switch of the SD Memory Card The SD Memory Card has a write protection switch on it. If the switch is moved to the [LOCK] side, you cannot write to , delete the data, or format the Card. If it is moved back, you can. PRESS MENU TO Deleting the Files Recorded on a Card 1, 2, 4 1, 2 W. B. /SHUTTER/IRIS/ MF/VOL/JOG 2 PUSH ~~~~~~~~~~~~~~~~~~~~~~~~~ 1 Using the Movie Camera, you can delete the files recorded on a Card. After the file is deleted, it cannot be restored. Please select the files to be deleted with [PICTURE/MPEG4/VOICE] Selector Switch. To erase a title, set the [PICTURE/MPEG4/VOICE] Selector Switch to [PICTURE]. 1, 1 To Select and Delete Files 1 Set [CARD FUNCTIONS] >> [ERASE CARD FILE] >> [ERASE FILE BY SELECTION]. To erase a title, select [ERASE TITLE BY SELECTION]. 2 Select the file you wish to delete and press the [PUSH] Dial. The frame around the selected file flashes. PHOTO SHOT 3 3 Press the [PHOTO SHOT] Button. A verification message appears. 4 Select [YES] and press the [PUSH] Dial. The selected file is deleted from the Card. If [NO] is selected, the file selection is cancelled. To erase 2 or more files, repeat steps 2-4. To Select and Delete All Files 1 Set [CARD FUNCTIONS] >> [ERASE CARD FILE] >> [ERASE ALL FILES]. 2 Select [YES] and press the [PUSH] Dial. All files with the selected Card Mode ([PICTURE], [MPEG4] or [VOICE]) will be deleted. Do not delete the Voice Files that recorded with this Movie Camera using other devices. When you delete Voice File, be sure to cancel the Lock setting before deleting. A verification message appears. 41 Formatting a Card 1 W. B. /SHUTTER/IRIS/ MF/VOL/JOG 2 PUSH If a Card becomes unreadable by the Movie Camera, formatting it may make it reusable. Formatting erases all the data recorded on a Card. 1 1 Set [CARD FUNCTIONS] >> [CARD EDITING] >> [CARD FORMAT] >> [YES]. Since a confirmation message appears, select [YES] and formatting will be carried out. [. . . ] File Search Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Formatting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 20 37 42 ªT Time Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Trailing Effect Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 ªU USB Connection Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]