User manual PANASONIC NV-EX1EG

[. . . ] To reduce the risk of fire, electric shock or product damage, do not expose this equipment to rain, moisture, dripping or splashing and ensure that no objects filled with liquids, such as vases, shall be placed on the equipment. AC Adaptor The rating plate is on the underside of the AC Adaptor. Caution for AC mains lead For your safety, please read the following text carefully. This appliance is supplied with a moulded three-pin mains plug for your safety and convenience. [. . . ] Then, while viewing a white subject on the entire screen, move the joystick up to select the [ ] indication. ª About flashing of the [ ] indication When the manual adjustment mode is selected Flashing indicates that the white balance previously adjusted is stored. This setting is stored until the white balance is adjusted again. When white balance cannot be set in the manual adjustment mode White balance may not be adjusted properly in the manual adjustment mode in dark places. During setting in the manual adjustment mode When the setting is completed, it will keep lit. ª About the white balance sensor The white balance sensor detects the type of light source during recording. Do not cover the white balance sensor during recording, or it may not function properly. AUTO MANUAL FOCUS 2 Set the [AUTO/MANUAL/FOCUS] switch to [FOCUS]. AUTO MANUAL FOCUS MF MNL The MNL and the manual focus indication [MF] will be displayed. 3 Move the joystick left or right in order to adjust the focus. MF MNL When focused with a wide angle, the subject may not be in focus when zoomed in. First, zoom in on the subject, and then focus on it. ª To restore to the automatic adjustment Set the [AUTO/MANUAL/FOCUS] switch to [AUTO] or [FOCUS]. 29 LSQT1006 Record mode Manual shutter speed/aperture adjustment Shutter Speed Adjust it when recording fast-moving subjects. Aperture Adjust it when the screen is too bright or too dark. 1 Set [ADVANCED] >> [REPEAT PLAY] >> [ON]. (In order to cancel the repeat playback mode, set [REPEAT PLAY] >> [OFF] or turn off the power. ) When you set [USB FUNCTION] >> [WEBCAM] and then connect the USB connection cable, the repeat playback mode is cancelled. (NV-GS37 only) ª Settings on the audio If you cannot listen to the desired audio when playing back a tape, check the settings in [SETUP] >> [12bit AUDIO]. When you record or dub the audio in [12bit] and set [SETUP] >> [12bit AUDIO] >> [MIX], the audio will be played back in stereo sound regardless of the settings in [AUDIO OUT]. 31 LSQT1006 Playback mode Slow-motion playback/ frame-by-frame playback Set to Tape Playback Mode. (Slow-motion playback can only be performed by using the remote control. ) Slow-motion playback (NV-GS37 only) If the image is recorded in the SP mode, then it will be played back at a speed approx. If the image is recorded in the LP mode, then it will be played back at a speed approx. 1 Press the [E] button or the [D] button on the remote control. ª To return to normal playback Press the [PLAY 1] button on the remote control or move the joystick up to the [1] icon to start playback. Slow-motion playback In the reversed slow-motion playback, the time code indication may be unstable. Frame-by-frame playback Press and hold the [E] or the [D] button in the playback pause, and then the images will continuously be played back frame by frame. Variable-speed search function (NV-GS37 only) The speed of cue/review playback can be varied. (This operation is only available when using the remote control. ) Set to Tape Playback Mode and play back a tape. 1 Press the [VAR SEARCH] button on the remote control. If the slow-motion playback continues for approx. [. . . ] Recording a fast-moving subject As the focus lens-inside moves mechanically, it cannot keep up with a fast-moving subject. Recording a subject with little contrast A subject with little contrast, such as a white wall, may become blurry because the movie camera achieves focus based upon the vertical lines of an image. 49 LSQT1006 Specifications Specifications Specifications Digital Video Camera Information for your safety Power source: DC 7. 9/7. 2 V Power consumption: Recording 2. 5 W (When using viewfinder) 3. 1 W (When using LCD monitor) Recording format: Mini DV (Consumer-use digital video SD format) Tape used: 6. 35 mm digital video tape Recording/playback time: SP: 80 min; LP: 120 min (with DVM80) Video Recording system: Digital component Television system: CCIR: 625 lines, 50 fields PAL colour signal Audio Recording system: PCM digital recording 16 bit (48 kHz/2 ch), 12 bit (32 kHz/4 ch) Image sensor: 1/6-inch CCD image sensor Lens: Auto Iris, F1. 8 to F3. 9, Focal length; 1. 9 mm to 57. 0 mm Macro (Full range AF) Filter diameter: 30. 5 mm Zoom: 30:1 Power zoom Monitor: 2. 5-inch LCD Viewfinder: (NV-GS37) Colour electronic viewfinder (NV-GS27) Electronic viewfinder Microphone: Stereo (with a zoom function) Speaker: 1 round speaker 20 mm Standard illumination: 1, 400 lx Minimum required illumination: 2 lx (Colour Night View Mode) Video output level: 1. 0 Vp-p, 75 h Audio output level (Line): 316 mV, 600 h USB: USB 2. 0 compliant, (Hi-Speed) (NV-GS37) (Full-Speed) (NV-GS27) No copyright protection support Digital interface: DV output terminal (IEEE1394, 4-pin) Dimensions: Approx. 82 mm (W)k69 mm (H)k120 mm (D) (excluding the projection part) Mass: Approx. 410 g (without supplied battery, DV cassette and lens cap) Approx. [. . . ]