User manual PANASONIC NV-EX21

[. . . ] Article 2 Use by a Third Party Licensee may not use, copy, modify, transfer or allow any third party, whether free of charge or not, to use, copy or modify the Software, except as expressly provided for in this Agreement. Article 3 Restrictions on Copying the Software Licensee may make a single copy of the Software in whole or a part solely for back-up purpose. Article 4 Computer Licensee may use the Software only on one computer, and may not use it on more than one computer. Article 5 Reverse Engineering, Decompiling or Disassembly Licensee may not reverse engineer, decompile, or disassemble the Software, except to the extent either of them is permitted under law or regulation of the country where Licensee resides. [. . . ] When connected to the keyboard USB terminal, normal function may not be possible. This instruction manual describes only the procedures for installation, connection and startup. Please read the PDF-based instructions for how to use the SD Viewer 3. 1E or the MotionDV STUDIO 5. 1E LE. To view the installed operating instructions, Adobe Acrobat Reader 5. 0 or higher is required. Please install Adobe Acrobat Reader from the supplied CD-ROM. Before using for the first time, select [Readme] from [Start] >> [All Programs (Programs)] >> [Panasonic] >> [SD Viewer] or [MotionDV STUDIO], and read any supplementary details or updates. The software is available in English, German and French. MotionDV STUDIO 5. 1E LE for DV OS: IBM PC/AT compatible personal computer with preinstalled; Microsoft Windows XP Home Edition/Professional SP1 or later Microsoft Windows 2000 Professional SP4 or later Microsoft Windows Me (Millennium Edition) (Only in DV connection) CPU: Intel Pentium III 700 MHz/AMD Athlon 1 GHz or higher (including compatible CPU) Graphic display: High Colour (16 bit) or more (32 bit recommended) Desktop resolution of 1024k768 pixels or more (Supporting the overlay of DirectDraw) 4 MB or more video memory Sound: PCM sound source(compatible DirectSound) 7 Install/Connection Installing USB Driver (Windows 98SE only) 3 The USB driver to be installed is the dedicated Mass Storage Driver for Windows 98SE. When your OS is any of Windows XP, Windows 2000 and Windows Me, you do not have to install the USB driver because the standard driver is activated for the operation. Please install USB Device Driver first before connecting the Movie Camera to your Personal Computer with the USB Connection Cable. 1 Turn on the Personal Computer and start up Windows. 2 Insert the supplied CD-ROM (Disc 1) into the personal computer's CD-ROM drive. 5 Quit all applications. The [Setup Menu] Screen appears. 3 Click [USB Driver]. The set up program starts running. 4 Finish installation by following the on-screen instructions. Click [Next] and proceed with installation. After completing the installation, Click [Finish]. 5 Click [Finish] when the [Restarting Windows] Dialogue appears. Reboot the computer to finish installing USB driver. (l 14) You cannot record the video edited by the PC onto the Tape in the Movie camera. 1) USB Connection Cable 2) USB terminal With DV Cable (optional) OS: Windows Me/2000/XP 1 Set the Movie Camera to Tape Recording Mode or Tape Playback Mode. 2 Connect the Movie Camera to Personal Computer with auxiliary DV Cable. 3 Start MotionDV STUDIO 5. 1E LE. (l 14) 1) You can record the video edited by the PC onto the Tape in the Movie camera. 1) DV Cable 2) DV terminal 2) 13 Software 1 Starting the Software ª To start SD Viewer 3. 1E 1 Select [Start] >> [All Programs (Programs)] >> [Panasonic] >> [SD Viewer for DV] >> [SD Viewer for DV]. 1 ª To start MotionDV STUDIO 5. 1E LE 1 Select [Start] >> [All Programs (Programs)] >> [Panasonic] >> [MotionDV STUDIO 5. 1E LE for DV] >> [MotionDV STUDIO]. If a short-cut icon has been created on the desktop during installation, it is also possible to start by double-clicking on the icon. Please read the PDF-based instructions for how to use it. (l 7) 14 Using the Movie Camera as a Web Camera (Windows XP SP1 or later only) To upgrade Windows XP to SP1, select [Start] >> [Windows Update]. If the Movie Camera is connected to your personal computer, you can send video and sound from the Movie Camera to the other parties via the network. Audio may also be exchanged if the personal computer is configured accordingly. (You can use the microphone equipped with the personal computer instead of the one on the Movie Camera. ) Refer to Page 6 for the minimum requirements. 1) 2) ª Connecting the Movie Camera to Personal Computer (For Using as a Web Camera) 3) WEB 1 Install Video Stream Driver and then make the Movie Camera recognized by a personal computer. (l 9) 2 Set [CAMERA] >> [USB FUNCTION] >> [WEB CAMERA]. 3 Connect the Movie Camera to Personal Computer with auxiliary USB Connection Cable. 4 Start the Windows Messenger. Click [Start] >> [Programs] >> [Windows Messenger]. 1) USB Connection Cable 2) USB terminal 3) The WEB CAMERA mode screen To send pictures recorded on a tape to other personal computer using the Windows Messenger, set [PLAYBACK] >> [USB FUNCTION] >> [WEB CAMERA] on Tape Playback Mode before connecting the Movie Camera to your personal computer. 15 1 ª Setting up the Windows Messenger When starting the Windows Messenger for the first time, its setup screen is displayed. [. . . ] Please refer to the user manual of your OS. 18 Notes Do not disconnect USB Connection Cable while the access light of the Movie Camera is on. It may freeze the software or destroy the data in transfer. Please refer to the Operating Instructions of Movie Camera. If you use Windows Me/98SE, the message, "File is not found" may be displayed when the Movie Camera is connected for the first time. [. . . ]