User manual PANASONIC NV-EX3B

[. . . ] This appliance is supplied with a moulded three pin mains plug for your safety and convenience. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark Ï or the BSI mark Ì on the body of the fuse. If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. [. . . ] 1 Move the [sVOLr] lever to adjust the volume. VOL 1 Operate with joystick. 1/;: Playback/Pause 6: Rewind/Review playback (Reverts to playback with the 1/; icon. ) 5: Fast forward/Cue playback (Reverts to playback with the 1/; icon. ) : Stop The power will not turn off when the LCD monitor and the viewfinder are closed and retracted during Tape Playback Mode. During cue/review playback, fast-moving images may show noise as a mosaic. Before and after cue/review playback, the screen may become black for a moment or images may be disturbed. Towards [r]: increases the volume Towards [s]: decreases the volume (Nearer the bar to [r], larger the volume. ) When the adjustment is completed, the volume indication will disappear. If you do not hear the sound, check the settings of [SETUP] >> [12bit AUDIO]. ª Repeat playback When the tape end is reached, the tape will be rewound and played back again. 1 Set [ADVANCED] >> [REPEAT PLAY] >> [ON]. (In order to cancel the repeat playback mode, set [REPEAT PLAY] >> [OFF] or turn off the power. ) ª Settings on the audio If you cannot listen to the desired audio when playing back a tape, check the settings in [SETUP] >> [12bit AUDIO]. When you record the audio in [12bit] and set [SETUP] >> [12bit AUDIO] >> [MIX], the audio will be played back in stereo sound regardless of the settings in [AUDIO OUT]. 31 LSQT1131 LSQT1131_ENG. book 32 Playback mode Frame-by-frame playback Set to Tape Playback Mode. 1 During playback, move the joystick up to select the [1/;] icon to pause playback. Playback on TV Images recorded by this camera can be played back on a TV. Insert a recorded tape into this camera. Be sure that the power of the unit is turned off before connecting it to a TV. For more information, refer to the operating instructions for your TV set and recorder. When you do not need functional indications or date and time indication, respectively set [SETUP] >> [DISPLAY] >> [OFF] or set [BASIC] >> [DATE/TIME] >> [OFF] in the Tape Playback Mode. (When you connect the movie camera and a recorder with the DV cable, these indications may not appear. ) ª When neither image nor sound from [VIDEO IN] A/V [AUDIO IN] 1 Connect the movie camera and the recorder by using the AV cable 1. If your recorder is not equipped with AV Input Sockets, the 21-pin Adaptor (purchase separately) is necessary. Consult your dealer. the movie camera is output to the TV set Check that the plugs are inserted as far as they go. (-38-) Check the connected terminal. 33 LSQT1131 LSQT1131_ENG. book 34 Edit mode Using the DV Cable for Recording (Digital Dubbing) By connecting other digital video equipment with DV terminal and the movie camera by using the DV cable VW-CD1E (optional) 1, high-imagequality dubbing can be done in digital format. This model cannot be used as a Recorder. (Player/recorder) 1 Connect the movie camera and digital video equipment with the DV cable. Using the movie camera as a Web Camera (Windows XP SP2) To upgrade Windows XP to SP2, click [start] >> [All Programs (Programs)] >> [Windows Update]. If the movie camera is connected to your personal computer, you can send video and sound from the movie camera to the other parties via the network. Audio may also be exchanged if the personal computer is configured accordingly. (You can use the microphone equipped with the personal computer instead of the one on the movie camera. ) Software: Windows Messenger 5. 0/5. 1 (Windows XP) MSN Messenger 7. 0/7. 5 (Windows 2000/XP) Windows Live Messenger 8. 0 (Windows XP) DirectX 9. 0b/9. 0c ª Connecting the movie camera to 1 2 Start playback. [. . . ] Recording a subject in dark surroundings The movie camera cannot focus correctly because the light information that comes through the lens decreases considerably. Recording a fast-moving subject As the focus lens-inside moves mechanically, it cannot keep up with a fast-moving subject. Recording a subject with little contrast A subject with little contrast, such as a white wall, may become blurry because the movie camera achieves focus based upon the vertical lines of an image. 48 LSQT1131 LSQT1131_ENG. book 49 Specifications Specifications Specifications Digital Video Camera Information for your safety Power source: DC 7. 9/7. 2 V Power consumption: Recording 4. 1 W Recording format: Mini DV (Consumer-use digital video SD format) Tape used: 6. 35 mm digital video tape Recording/playback time: SP: 80 min; LP: 120 min (with DVM80) Video Recording system: Digital component Television system: CCIR: 625 lines, 50 fields PAL colour signal Audio Recording system: PCM digital recording 16 bit (48 kHz/2 ch), 12 bit (32 kHz/4 ch) Image sensor: 1/6-inch CCD image sensor [Effective pixels] Moving picture: 400 K (4:3), 540 K (16:9)/ Still picture: 410 K (4:3), 550 K (16:9)/ Total: 800 K Lens: Auto Iris, F1. 8 to F3. 7, Focal length; 2. 30 mm to 73. 6 mm Macro (Full range AF) Filter diameter: 37 mm Zoom: 32:1 Power zoom Monitor: 2. 7-inch LCD Viewfinder: Colour electronic viewfinder Microphone: Stereo (with a zoom function) Speaker: 1 round speaker 20 mm Standard illumination: 1, 400 lx Minimum required illumination: 12 lx (Low light mode: 1/50) 2 lx (Colour Night View Mode) Video output level: 1. 0 Vp-p, 75 h Audio output level (Line): 316 mV, 600 h USB: No copyright protection support Digital interface: DV output terminal (IEEE1394, 4-pin) Dimensions: 78. 5 mm (W)k72. 6 mm (H)k136. 0 mm (D) (excluding the projecting parts) Mass: Approx. 450 g (without supplied battery, DV cassette and lens cap) Approx. [. . . ]