User manual PANASONIC NV-GS120GN

[. . . ] R Operating Instructions Digital Video Camera Model No. NV-GS120GN NV-GS200GN Before use, please read these instructions completely. VQT0H99 Information for Your Safety As this equipment gets hot during use, operate it in a well-ventilated place; do not install this equipment in a confined space such as a bookcase or similar unit. To reduce the risk of fire, electric shock or product damage, do not expose this equipment to rain, moisture, dripping or splashing and ensure that no objects filled with liquids, such as vases, shall be placed on the equipment. AC Adaptor The rating plate is on the underside of the AC Adaptor. use, recording of certain material may be restricted. The Movie Camera uses copyright-protected technologies and is protected by the patented technologies and intellectual properties of Japan and the U. S. [. . . ] VCR: 2 Insert an unrecorded Cassette with an erasure prevention tab. If various setups (such as external input, tape speed, etc. ) are required, please refer to the operating instructions of your VCR. Movie Camera: 3 Press the [1] Button to start playback. 5 Press the Pause or Stop Button to stop recording. Movie Camera: 6 Press the [] Button to stop playback. -46- Editing Mode Recording the Contents of Other Equipment After connecting the Movie Camera and the other equipment as illustrated, start the following procedures. Movie Camera: 4 While pressing the [¥REC] Button (61), press the [1] Button (79) on the Remote Controller. Or while pressing the [REC] Button (7), press the [BACK LIGHT] Button (8) on the Movie Camera. sVOL r MULTI/ P-IN-P V T ¥REC A. DUB FF/W (61) W (79) (76) (77) /REW PLAY 6 1 5 STILL ADV PAUSE STILL ADV E INDEX K ; STOP D INDEX L P. B. ZOOM [S-VIDEO OUT] [VIDEO OUT] [AUDIO OUT] 2 1 (7) REC BACK LIGHT (8) AV IN/OUT PHONES DV S-VIDEO IN/OUT 1 AV Cable 2 S-Video Cable Movie Camera: 1 Set [TAPE PLAYBACK MENU] >> [AV IN/OUT] >> [AV JACK] >> [IN/OUT]. STILL When recording on a card, press the [PHOTO SHOT] Button or the Recording Start/Stop Button. 5 Press the [;] Button (76) or [] Button (77) to stop recording. Other Equipment: 6 Press the Stop Button to stop playback. For other notes concerning this item, see -61-. Using the DV Cable for Recording (Digital Dubbing) By connecting this Movie Camera to other digital video equipment that has a DV Input/Output Terminal with a DV Cable VW-CD1E (optional) 1, dubbing can be done in the digital format. s ENTER FADE i (14) MENU 2 Insert an unrecorded Cassette. Other Equipment: 3 Insert a recorded Cassette and start playback. DV 1 Player/Recorder: 1 Insert the Cassette and set to Tape Playback Mode. -47- Editing Mode Player: 2 Press the [1] Button (79) to start playback. sVOL r 2 Connect the printer with the supplied USB Cable. MULTI/ P-IN-P V T ¥REC A. DUB FF/W (61) W (79) (76) (77) /REW PLAY 6 1 5 STILL ADV PAUSE STILL ADV E INDEX K ; STOP D INDEX L P. B. ZOOM (PLUG IN POWER) REMOTE/MIC AV IN/OUT PHONES (7) (8) REC BACK LIGHT 1 Recorder: 3 While pressing the [¥REC] Button (61), press the [1] Button (79) on the Remote Controller. Or while pressing the [REC] Button (7), press the [BACK LIGHT] Button (8) on the Movie Camera. Recording starts. 1 USB Cable PRINT To Stop Dubbing Press the [;] Button (76) or the [] Button (77). For other notes concerning this item, see -62-. The [PRINT] Indication appears on the screen of the Movie Camera. Highlighted: Printable Blinking: Printer is being recognized. The [PRINT] Indication does not appear when the card is not inserted in the Movie Camera. (You cannot print pictures. ) When the [PRINT] Indication keeps blinking (more than about 1 minute), the Movie Camera and the printer are not connected properly. Connect the cable again or check the printer. When the Movie Camera and the printer is connected in the Tape Recording/Playback Mode, the [WEB ] or the [WEB ] Indication may appear on the LCD Monitor. However, images cannot be printed. Printing pictures with directly connecting to the printer (PictBridge) After connecting the Movie Camera and the printer compatible with PictBridge, start the following procedures. To print pictures with directly connecting the Movie Camera to the printer, prepare the printer compatible with PictBridge. [. . . ] 5) Recording a fast-moving subject Because the focus lens-inside moves mechanically, it cannot keep up with the fast-moving subject. 6) Recording a subject with little contrast Because the Movie Camera achieves focus based upon the vertical lines of an image, a subject with little contrast, such as a white wall, may become blurry. ª Memory Stop Function The Memory Stop Function is useful for the following operations. Rewinding or fast-forwarding a tape to a desired position 1 Set [DISPLAY] >> [C. DISPLAY] >> [MEMORY]. 2 Reset the Tape Counter to zero at the tape position from which you want to play it back later. [. . . ]