User manual PANASONIC NV-GS150EB

[. . . ] Operating Instructions For PC Connection Before use, please read these instructions completely. VQT0N44-1 Before opening the CD-ROM package, please read the following. NV-GS21/17: not supplied End User License Agreement (for USB Driver, Video Stream Driver and MotionDV STUDIO) You ("Licensee") are granted a license for the Software defined in this End User Soft Agreement ("Agreement") on condition that you agree to the terms and conditions of this Agreement. If Licensee does not agree to the terms and conditions of this Agreement, promptly return the Software to Matsushita Electric Industrial Co. , Ltd. ("Matsushita"), its distributors or dealers from which you made the purchase. Article 1 License Licensee is granted the right to use the software, including the information recorded or described on the CD-ROM, instruction manuals, and any other media provided to Licensee (collectively "Software"), but all applicable rights to patents, copyrights, trademarks and trade secrets in the Software are not transferred to Licensee. [. . . ] Applications which are compatible with older version of DirectX may not operate properly by installing DirectX 9. 0b. In this case, consult the manufacturers of the applications disabled. 1 Insert the supplied CD-ROM into the personal computer's CD-ROM drive. Quit all applications. The [Setup Menu] screen appears. 3 2 Click [MotionDV STUDIO 5. 3E LE]. After reading the displayed contents, please carry out the installation according to instructions. 3 Select the video system. 4 After the completion of setup, click on [Finish]. Sample data is installed concurrently with the MotionDV STUDIO 5. 3E LE software. 4 9 VQT0N44 Installing Video Stream Driver Install this when your OS is Windows XP SP1, or Windows 2000 SP4 or later. (When your OS is Windows XP SP2 or later, installing Video Stream Driver is not needed. ) (The computer needs to be connected to the Internet. ) Video Stream Driver is needed to be installed when you connect the movie camera to the PC with the supplied USB cable and use MotionDV STUDIO. DirectX 9. 0b is installed in your PC if it is not installed beforehand. Applications which are compatible with older version of DirectX may not operate properly by installing DirectX 9. 0b. In this case, consult the manufacturers of the applications disabled. 2 1 Insert the supplied CD-ROM into the personal 3 computer's CD-ROM drive. Quit all applications. The [Setup Menu] screen appears. 2 Click [Video Stream Driver]. The set up program starts running. 3 You may be required to install DirectX 9. 0b depending on the environment of the personal computer. In this case, click [Yes] to install it. Reboot the computer after DirectX is installed. Do not take out the CD-ROM. 4 Finish installation by following the on-screen instructions. Click [Next] and proceed with installation. After completing the installation, click [Finish]. Reboot the computer to finish installing Video Stream Driver. 10 VQT0N44 Installing USB Driver (Windows 98SE only) The USB Driver to be installed is the dedicated mass storage driver for Windows 98SE. When your OS is any of Windows XP, Windows 2000 and Windows Me, you do not have to install the USB Driver because the standard driver is activated for the operation. Please install USB device driver first before connecting the movie camera to your personal computer with the USB connection cable. 3 1 Turn on the personal computer and start up Windows. 2 Insert the supplied CD-ROM into the personal computer's CD-ROM drive. Quit all applications. The [Setup Menu] screen appears. 5 3 Click [USB Driver]. The set up program starts running. 4 Finish installation by following the on-screen instructions. Click [Next] and proceed with installation. After completing the installation, click [Finish]. 5 Click [Finish] when the [Restarting Windows] dialogue appears. Reboot the computer to finish installing USB Driver. Installation continues after the computer reboots if you selected additional software. A message indicating a conflict between versions may be displayed during the installation. Simply click [Yes] to proceed with the installation. 11 VQT0N44 3 Connecting the movie camera to personal computer When you use a personal computer, use of the AC adaptor is recommended for the power supply of the movie camera. 4 ª Confirmation before connection (for Windows XP/2000) When you connect the personal computer and the movie camera with the USB connection cable and then use MotionDV STUDIO on Windows XP (SP1 or later) or Windows 2000 (SP4 or later), check the driver of the USB host controller. It is required to use the driver for which [Microsoft] is displayed on [Driver Provider] in [Driver] tab. 1 1 Select [Start] >> [Settings] >> [Control Panel] to start [System]. [System Properties] is displayed. 2 Click [Hardware] tab and then click [Device Manager]. 3 Right-click [Enhanced Host Controller] etc. [. . . ] (In this manual, explanation is offered with Windows XP screen. ) 1 Select [Start] (>> [Settings]) >> [Control Panel], select the software or the driver from [Add/Remove Programs] to uninstall. Uninstalling steps may vary depending on the OS. Please refer to the user manual of your OS. 15 VQT0N44 Notes Do not disconnect USB connection cable while the access light of the movie camera is on. It may freeze the software or destroy the data in transfer. Please refer to the operating instructions of movie camera. [. . . ]