User manual PANASONIC NV-GS180EE

[. . . ] To reduce the risk of fire, electric shock or product damage, do not expose this equipment to rain, moisture, dripping or splashing and ensure that no objects filled with liquids, such as vases, shall be placed on the equipment. AC Adaptor The rating plate is on the underside of the AC Adaptor. If a new plug is to be fitted, please observe the wiring code as shown below. If in any doubt, please consult a qualified electrician. ª IMPORTANT The wires in this mains lead are coloured in accordance with the following code: Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter N or coloured BLACK. [. . . ] You may not be able to properly play back or search the images on the Movie Camera after editing the recorded data or changing the image data on a personal computer. The image data files recorded on the Card with this Movie Camera conform to the DCF (Design rule for Camera File system) stipulated by JEITA (Japan Electronics and Information Technology Industries Association). Using as a Web Camera or with DV STUDIO If the Movie Camera is connected to your Personal Computer, you can send video from the Movie Camera to other parties via the network. Do not connect the USB Cable until the USB driver or Web Camera driver is installed. 1 Install the supplied USB driver or Web Camera driver. 2 Set the Mode Dial to Tape Recording Mode (or Tape Playback Mode when using with DV STUDIO). -44- With a PC Moving Picture format (MPEG4) that can be played back on this device is ASF. (Depending on the file, it may not be able to be played back even if it is in ASF format. ) Folder Configuration when the Card is used with a PC When a Card with data recorded on it is inserted into a personal computer, folders will be displayed as in the figure. SD Memory Card: In the Card Recording Mode, the Movie Camera automatically saves file numbers (IMGA0001. JPG, etc. ) along with the images. The file numbers are recorded with each image as a consecutive number. When using the software without indication function, indication data, such as date, are not displayed. Depending on the software in use, the date and the time may not be displayed correctly. The memory capacity indicated on the SD Memory Card label corresponds to the total amount of the capacity to protect and manage the copyright and of the capacity available as a conventional memory for a Movie Camera, Personal Computer or others. 640 or more, less than 800 (The 640 : size is not displayed at under 640 pixels. ) 800 or more, less than 1024 SVGA : 1024 or more, less than 1280 XGA : 1280 or more, less than 1600 SXGA : 1600 or more, less than 2048 UXGA : 2048 or more QXGA : PICTURE (Cyan): Photoshot Mode PICTURE (Red): While Photoshot recording is activated PICTURE (Green): While the card is being read PICTURE (Red): No Card (Still Picture Mode) MPEG4 (Cyan): Moving Picture (MPEG4) Recording Mode MPEG4 (Red): While Moving Picture (MPEG4) recording is activated Initializing the Modes You can change the Menu settings back to the shipping condition. 1 Set [INITIAL] >> [INITIAL SET] >> [YES]. After the initializing is completed, the [COMPLETED] Indication appears with beeps. Initializing will not erase the clock setting (-18-) that has been adjusted. Warning/Alarm Indications If any one of the following indications lights up or flashes, please check the condition of the Movie Camera. 3DEW (DEW DETECT/EJECT TAPE): Condensation has occurred. -55Y (CHECK REC TAB/TAPE NOT INSERTED): You are attempting to record pictures on a Tape with setting the accidental erasure prevention slider to [SAVE]. You are attempting Audio dubbing or Digital dubbing on a Tape with setting the accidental erasure previntion slider to [SAVE]. -18: (NEED HEAD CLEANING): The video heads are dirty. -562END (TAPE END): The tape came to the end during recording. REMOTE (CHECK REMOTE MODE): Wrong Remote Controller Mode has been selected. -9UNPLAYABLE TAPE (OTHER FORMAT): You are attempting to play back a tape ª To Change the Counter Display Mode By changing [C. DISPLAY] on the [DISPLAY] Sub-Menu, you can change the Counter Display Mode to Tape Counter Indication [COUNTER] (0:00. 00), Memory Counter Indication [MEMORY] (M0:00. 00), and Time Code Indication [TIMECODE] (0h00m00s00f). [. . . ] 30 Slow Motion Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Soft Skin Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Solarisation Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Sound Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]