User manual PANASONIC NV-GS27EE

[. . . ] The manufacturer shall in no event be liable for the loss of recordings due to malfunction or defect of this Movie Camera, its accessories or cassettes. Recording of pre-recorded tapes or discs or other published or broadcast material for purposes other than your own private use may infringe copyright laws. Even for the purpose of private use, recording of certain material may be restricted. Patents and other intellectual property rights. [. . . ] 3 Move the joystick left or right in order to When focused with a wide angle, the subject may not be in focus when zoomed in. First, zoom in on the subject, and then focus on it. Record mode Manual shutter speed adjustment Avoid recording under fluorescent light, mercury light or sodium light because the colour and brightness of the playback image may change. If you increase the shutter speed manually, the sensitivity lowers and accordingly the gain value increases automatically, which may increase the noises on the screen. You may see vertical lines of light in the playback image of a brightly shining subject or highly reflective subject, but this is not a malfunction. During normal playback, image movement may not look smooth. When recording in the extremely bright place, the colour of the screen may change or flickers. if so , adjust the shutter speed manually to 1/50 or 1/100. Manual iris/gain adjustment Set the shutter speed before setting the aperture (iris/gain) when manually adjusting both settings. If the value does not become "OPEN", you cannot adjust the gain value. if the gain value is increased , the noise on the screen increases. (For more information, please read the operating instructions for the TV. Pictures recorded by the movie camera can be stored on a DVD-RAM or other such media. Connecting with the optional DV cable (Only for equipment with a DV terminal) (Player) If you record (dub) images onto another video device and then play them back on a widescreen TV, the images may be stretched vertically. In this case, refer to the operating instructions for the device that you are recording (dubbing) to or read the operating instructions for the TV and set to 16:9 (full). For more information, refer to the operating instructions for your TV set and recorder. When you do not need functional indications or date and time indication, respectively set [SETUP] >> [DISPLAY] >> [OFF] or set [BASIC] >> [DATE/TIME] >> [OFF] in the Tape Playback Mode. (When you connect the movie camera and a recorder with the DV cable, these indications may not appear. ) ª When neither image nor sound from Connect the movie camera and the recorder by using the AV cable 1. Check that the plugs are inserted as far as they go. By connecting other digital video equipment with DV terminal and the movie camera by using the DV cable VW-CD1E (optional) 1, high-imagequality dubbing can be done in digital format. This model cannot be used as a Recorder. [. . . ] However, this is not a malfunction and does not affect the recorded picture. ª Periodical check-ups To maintain the highest image quality, we recommend replacing worn parts such as heads after approx. (This, however, depends on operating conditions including temperature, humidity and dust. ª Automatic white balance White balance adjustment recognizes the colour of light and adjusts so the white colour will become a pure white. [. . . ]