User manual PANASONIC NV-GS50EN

[. . . ] Digital Video Camera Operating Instructions Model No. NV-GS50EN Before use, please read these instructions completely. VQT0C47-2 AC AC -00- ª ª WindowsMicrosoft SD MultiMediaCard SD -2- . . . . . . . . . . . . . . . . . . . . . . . . . 2 VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 27 28 28 28 29 29 30 31 32 32 33 33 . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The pictures for which 1 or more print is set in DPOF are played back continuously. For other notes concerning this item, see -128-. Protecting the Files on a Card (27) (Lock Setting) Precious files recorded on a Card can be locked (to prevent accidental erasure). (Even if files are locked, the files will be deleted when the Card is formatted. ) -112- CARD Mode 1 Set [CARD FUNCTIONS] >> [CARD EDITING] >> [FILE LOCK] >> [YES]. (46) (38) WB/SHUTTER/IRIS/ PUSH 2 Set [CARD FUNCTIONS] >> [DELETE CARD FILE] >> [DELETE FILE BY SELECTION]. (46) (38) WB/SHUTTER/IRIS/ PUSH MF/VOL/JOG MENU MENU MF/VOL/JOG The [FILE LOCK] Menu is displayed. 2 Select [PICTURE] or [TITLE]. FILE LOCK 640 640 640 640 640 640 1 PRESS MENU TO EXIT 3 Select the file to be locked, and press the [PUSH] Dial (38). The selected file is locked and the [ ] Indication 1 is attached. Repeat this procedure to lock 2 or more. Files recorded by Voice Recording Function is automatically locked (to prevent accidental erasure). Press the [PUSH] Dial (38) again to cancel. The SD Memory Card has a write protection switch. (-128-) For other notes concerning this item, see -128-. To erase a title, select [DELETE TITLE BY SELECTION]. 3 Select the file you wish to delete and press the [PUSH] Dial (38). The frame around the selected file flashes. To erase 2 files or more, repeat this step. 4 Press the [PHOTO SHOT] Button (26). PHOTO SHOT (26) A verification message appears. 5 Select [YES] and press the [PUSH] Dial (38). The selected file is deleted from the Card. If [NO] is selected, the file selection is cancelled. Deleting the Files Recorded on a Card Using the Movie Camera, you can delete the files recorded on a Card. After the file is deleted, it cannot be restored. To Select and Delete All Files 1 Slide the [TAPE/CARD/CARD MODE] Selector (27) to [CARD MODE] until the type of data to be erased indication appears. TAPE CARD CARD MODE To Select and Delete Files 1 Slide the [TAPE/CARD/CARD MODE] Selector (27) to [CARD MODE] until the type of data to be erased indication appears. TAPE CARD CARD MODE (27) 2 Set [CARD FUNCTIONS] >> [DELETE CARD FILE] >> [DELETE ALL FILES]. (46) (38) WB/SHUTTER/IRIS/ PUSH (27) MENU MF/VOL/JOG A verification message appears. -113- CARD Mode 3 Select [YES] and press the [PUSH] Dial (38). All the files of the selected Card Mode ([PICTURE], [MPEG4] or [VOICE]) are erased. When you delete Voice File, be sure to cancel the Lock setting before deleting. Do not delete the Voice Files recorded with this Movie Camera using other devices. Formatting a Card If a Card becomes unreadable by the Movie Camera, formatting it may make it reusable. Formatting erases all the data recorded on a Card. 1 Set [CARD FUNCTIONS] >> [CARD EDITING] >> [CARD FORMAT] >> [YES]. (46) (38) WB/SHUTTER/IRIS/ PUSH MF/VOL/JOG MENU Since a confirmation message appears, select [YES] and formatting will be carried out. CARD FORMAT FORMAT WILL DELETE ALL FILES AND PRESET TITLES NO --RETURN YES When the formatting is completed, the screen becomes white. It may not be possible to use the Card which was formatted using this Movie Camera on another unit. In this case, format the Card on the unit which will be using the Card. [. . . ] When a new (previously unrecorded) Cassette is inserted, the Time Code automatically starts from zero. If a recorded Cassette is inserted, the Time Code picks up from the point where the last scene was recorded. (In this case, when the Cassette is inserted, the zero display [0h00m00s00f] may appear, but the Time Code starts from the previous value. ) The Time Code cannot be reset to zero. Unless the Time Code is continuously recorded from the beginning of a tape, accurate editing may not be possible. [. . . ]