User manual PANASONIC NV-GS75GC

[. . . ] R Operating Instructions Digital Video Camera Model No. NV-GS75GC Before use, please read these instructions completely. VQT0N58 ( ) AC AC Macrovision Windows Microsoft SD SD -00 >> ª ( ) ( ) ª 2 VQT0N58 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 / . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 3 Move the joystick left or right in order to adjust the focus. MNL MF When focused with a wide angle, the subject may not be in focus when zoomed in. First, zoom in on the subject, and then focus on it. ª To restore to the automatic adjustment Set the [AUTO/MANUAL/FOCUS] switch to [AUTO] or [FOCUS]. 1 2 3 1 Black balance adjustment (Flashes. ) 2 White balance adjustment (Flashes. ) 3 Adjustment completed (Lights up. ) 73 VQT0N58 Record mode Manual shutter speed/aperture adjustment Shutter Speed Adjust it when recording fast-moving subjects. Aperture Adjust it when the screen is too bright or too dark. 1 Set the [AUTO/MANUAL/FOCUS] switch to [MANUAL]. Manual iris/gain adjustment If the value does not become "OPEN", you cannot adjust the gain value. If the gain value is increased, the noise on the screen increases. Depending on the zoom magnification, there are iris values that are not displayed. ª Shutter speed range 1/50­1/8000 seconds: Tape Recording Mode 1/25­1/500 seconds: Card Recording Mode The shutter speed closer to 1/8000 is faster. ª Iris/gain value range CLOSE (Closed), F16, . . . , F2. 0, OPEN (Opened) 0dB, . . . , 18dB Value closer to [CLOSE] darken the image. Value closer to [18dB] brighten the image. Values with dB are gain values. AUTO MANUAL FOCUS 2 Move the joystick down until the shutter speed indication or aperture value indication appears. MNL 1/50 OPEN OdB 1) 1/1000 MNL 2) 1/50 F2. 0 0dB MNL 1) Shutter speed 2) (Aperture) Iris/gain value 3 Move the joystick left or right in order to adjust the shutter speed or aperture. ª To restore to automatic adjustment Set the [AUTO/MANUAL/FOCUS] switch to [AUTO]. Manual shutter speed adjustment Avoid recording under fluorescent light, mercury light or sodium light because the colour and brightness of the playback image may change. If you increase the shutter speed manually, the sensitivity lowers and accordingly the gain value increases automatically, which may increase the noises on the screen. You may see vertical lines of light in the playback image of a brightly shining subject or highly reflective subject, but this is not a malfunction. During normal playback, image movement may not look smooth. When recording in the extremely bright place, the colour of the screen may change or flickers. If so adjust the shutter speed manually to 1/50 or 1/100. 74 VQT0N58 Playback mode Playback mode Playing back tape Set to Tape Playback Mode. PC ª Repeat playback When the tape end is reached, the tape will be rewound and played back again. 1 Set [ADVANCE] >> [REPEAT PLAY] >> [ON]. (In order to cancel the repeat playback mode, set [REPEAT PLAY] >> [OFF] or set [OFF/ON] switch to [OFF]. ) When you set [USB FUNCTION] >> [WEBCAM] and then connect the USB connection cable, the repeat playback mode is canceled. ª Settings on the audio If you cannot listen to the desired audio when playing back a tape, check the settings in [SETUP] >> [12bit AUDIO]. When you record or dub the audio in [12bit] and set [SETUP] >> [12bit AUDIO] >> [MIX], the audio will be played back in stereo sound regardless of the settings in [AUDIO OUT]. 1 Operate with joystick. 1/;: Playback/Pause 6: Rewind/Review playback (Reverts to playback with the 1/; icon. ) 5: Fast forward/Cue playback (Reverts to playback with the 1/; icon. ) : Stop During cue/review playback, fast-moving images may show noise as a mosaic. [. . . ] ª Auto focus Auto focus automatically moves the focusing lens forward and backward inside the movie camera to bring the subject into focus. Auto focus has the following characteristics. Adjusts so that the vertical lines of a subject are seen more clearly. Attempts to bring an object with higher contrast into focus. [. . . ]