User manual PANASONIC NV-GS90

[. . . ] Before use, please read these instructions completely. ª Carefully read the Operating Instructions and use the Movie Camera correctly Injury or material damage resulting from any kind of use that is not in accordance with the operating procedures explained in these Operating Instructions are the sole responsibility of the user. Be sure to try out the Movie Camera before recording your first important event and check that it records properly and functions correctly. the manufacturer is not liable for loss of recorded contents. [. . . ] If the value does not become "OPEN", you cannot adjust the gain value. if the gain value is increased , the noise on the screen increases. Depending on the zoom magnification, there are iris values that are not displayed. ª Shutter speed range 1/25 to 1/8000 seconds: Tape Recording Mode The shutter speed closer to 1/8000 is faster. If [AUTO SLW SHTR] is set to [OFF], then the shutter speed will be set between 1/50 and 1/8000. ) : Stop The power will not turn off when the LCD monitor and the viewfinder are closed and retracted during Tape Playback Mode. During cue/review playback, fast-moving images may show noise as a mosaic. Before and after cue/review playback, the screen may become black for a moment or images may be disturbed. when the adjustment is completed , the volume indication will disappear. If you do not hear the sound, check the settings of [SETUP] >> [12bit AUDIO]. (In order to cancel the repeat playback mode, set [REPEAT PLAY] >> [OFF] or turn off the power. ) ª Settings on the audio If you cannot listen to the desired audio when playing back a tape, check the settings in [SETUP] >> [12bit AUDIO]. When you record the audio in [12bit] and set [SETUP] >> [12bit AUDIO] >> [MIX], the audio will be played back in stereo sound regardless of the settings in [AUDIO OUT]. Images recorded by this camera can be played back on a TV. insert a recorded tape into this camera. Be sure that the power of the unit is turned off before connecting it to a TV. Towards [T]: normal direction Towards [W]: reversed direction If you keep pushing the lever, then the images will continuously be played back frame by frame. Connect the movie camera and a TV by using the AV cable 1. Turn on this camera and set the mode dial to the Tape Playback Mode. If the images are not played back correctly on the TV (e. They are displayed vertically), perform the menu operations in accordance with the aspect ratio of the TV monitor. Move the joystick down to select the [] icon to stop playback. [. . . ] The movie camera determines the hue of light that comes through the lens and white balance sensor, thereby judging the recording condition, and selects the closest hue setting. This is called automatic white balance adjustment. However, since the movie camera only stores white colour information under several light sources, automatic white balance adjustment does not function normally under the other light sources. ª White balance The image recorded by the movie camera may become bluish or reddish under the influence of light sources. [. . . ]