User manual PANASONIC NV-GS90EB

[. . . ] Operating Instructions Digital Video Camera Model No. NV-GS90 Before use, please read these instructions completely. EB LSQT1291 B Dear Customer, We would like to take this opportunity to thank you for purchasing this Panasonic Movie Camera. Please read these Operating Instructions carefully and keep them handy for future reference. Please note that the actual controls and components, menu items, etc. of your Movie Camera may look somewhat different from those shown in the illustrations in these Operating Instructions. Caution for AC mains lead For your safety, please read the following text carefully. [. . . ] ª Iris/gain value range CLOSE (Closed), F16, . . . , F2. 0, OPEN (Opened: F1. 8) 0dB, . . . , 18dB Value closer to [CLOSE] darken the image. Value closer to [18dB] brighten the image. Values with dB are gain values. 1/25 1) MNL 2) MNL 1/1000 1/50 F2. 0 0dB 1) Shutter speed 2) (Aperture) Iris/gain value ª To restore to automatic adjustment Press the [AUTO] button. 31 LSQT1291 Playback mode Playback mode Playing back tape Set to Tape Playback Mode. (An operation icon automatically appears on the LCD monitor. ) ª To adjust volume Adjust the speaker volume for playback. 1 Move the [sVOLr] lever to adjust the volume. 1 Operate with joystick. Towards [r]: increases the volume Towards [s]: decreases the volume (Nearer the bar to [r], larger the volume. ) 1/;: Playback/Pause 6: Rewind/Review playback (Reverts to playback with the 1/; icon. ) 5: Fast forward/Cue playback (Reverts to playback with the 1/; icon. ) : Stop The power will not turn off when the LCD monitor and the viewfinder are closed and retracted during Tape Playback Mode. During cue/review playback, fast-moving images may show noise as a mosaic. Before and after cue/review playback, the screen may become black for a moment or images may be disturbed. When the adjustment is completed, the volume indication will disappear. If you do not hear the sound, check the settings of [SETUP] >> [12bit AUDIO]. ª Repeat playback When the tape end is reached, the tape will be rewound and played back again. 1 Set [ADVANCED] >> [REPEAT PLAY] >> [ON]. (In order to cancel the repeat playback mode, set [REPEAT PLAY] >> [OFF] or turn off the power. ) ª Settings on the audio If you cannot listen to the desired audio when playing back a tape, check the settings in [SETUP] >> [12bit AUDIO]. When you record the audio in [12bit] and set [SETUP] >> [12bit AUDIO] >> [MIX], the audio will be played back in stereo sound regardless of the settings in [AUDIO OUT]. 32 LSQT1291 Playback mode Frame-by-frame playback Set to Tape Playback Mode. 1 During playback, move the joystick up to select the [1/;] icon to pause playback. ; Playback on TV Images recorded by this camera can be played back on a TV. Insert a recorded tape into this camera. Be sure that the power of the unit is turned off before connecting it to a TV. 1 Connect the movie camera and a TV. 21-pin Adaptor 2 Push the [sVOLr] lever. [VIDEO IN] [AUDIO IN] A/V 1 2 3 Towards [T]: normal direction Towards [W]: reversed direction If you keep pushing the lever, then the images will continuously be played back frame by frame. Continuous frame-by-frame playback will start after the pause icon disappears. ª To return to normal playback Move the joystick up to select the [1/;] icon to start playback. 4 5 Connect the movie camera and a TV by using the AV cable 1. If your TV is not equipped with AV Input Sockets, the 21-pin Adaptor (purchase separately) is necessary. Turn on this camera and set the mode dial to the Tape Playback Mode. If the images are not played back correctly on the TV (e. g. [. . . ] 1) The effective range of automatic white balance adjustment on this movie camera 2) Blue sky 3) TV screen 4) Cloudy sky (rain) 5) Sunlight 6) White fluorescent lamp 7) 2 hours after sunrise or before sunset 8) 1 hour after sunrise or before sunset 9) Halogen light bulb 10) Incandescent light bulb 11) Sunrise or sunset 12) Candlelight 49 LSQT1291 Specifications Specifications Specifications Digital Video Camera Information for your safety Power source: DC 9. 3/7. 2 V Power consumption: Recording 4. 1 W Recording format: Mini DV (Consumer-use digital video SD format) Tape used: 6. 35 mm digital video tape Recording/playback time: SP: 80 min; LP: 120 min (with DVM80) Video Recording system: Digital component Television system: CCIR: 625 lines, 50 fields PAL colour signal Audio Recording system: PCM digital recording 16 bit (48 kHz/2 ch), 12 bit (32 kHz/4 ch) Image sensor: 1/6-inch CCD image sensor [Effective pixels] Moving picture: 400 K (4:3), 370 K (16:9)/ Still picture: 410 K (4:3), 380 K (16:9)/ Total: 800 K Lens: Auto Iris, F1. 9 to F4. 3, Focal length; 1. 80 mm to 75. 6 mm Macro (Full range AF) Zoom: 42:1 Power zoom Monitor: 2. 7-inch LCD Viewfinder: Colour electronic viewfinder Microphone: Stereo (with a zoom function) Speaker: 1 round speaker 20 mm Standard illumination: 1, 400 lx Minimum required illumination: 6 lx 2 lx (Colour Night View Mode) Video output level: 1. 0 Vp-p, 75 h Audio output level (Line): 316 mV, 600 h USB: No copyright protection support Digital interface: DV output terminal (IEEE1394, 4-pin) Dimensions: 67. 0 mm (W)k84. 5 mm (H)k119. 3 mm (D) (excluding the projecting parts) Mass: Approx. 390 g (without supplied battery and DV cassette) Approx. 470 g (with supplied battery and DV cassette) Operating temperature: 0 oC to 40 oC Operating humidity: 10% to 80% WEB camera Compression: Motion JPEG Image size: 320k240 pixels (QVGA) Frame rate: Approx. 6 fps AC adaptor VSK0698 Information for your safety Power source: AC 110 V to 240 V, 50/60 Hz Power consumption: 19 W DC output: DC 9. 3 V, 1. 2 A (Movie camera operation) DC 8. 4 V, 0. 65 A (Battery charging) Dimensions: 92 mm (W)k33 mm (H)k61 mm (D) Mass: Approx. [. . . ]