User manual PANASONIC NV-GX7B

[. . . ] Digital Video Camera Operating Instructions Model No. NV-GX7B Before use, please read these instructions completely. VQT9799 Dear Customer, We would like to take this opportunity to thank you for purchasing this Panasonic Movie Camera. Please read these Operating Instructions carefully and keep them handy for future reference. Please note that the actual controls and components, menu items, etc. of your Movie Camera may look somewhat different from those shown in the illustrations in these Operating Instructions. Information for Your Safety As this equipment gets hot during use, operate it in well ventilated place; do not install this equipment in a confined space such as a bookcase or similar unit. [. . . ] r: Remaining Battery Power When the battery power becomes low, the Indication changes. When the battery is discharged completely, the u (v) Indication flashes. s: (When you are using the AC Adaptor, the [s] Indication may appear, however, this is not a malfunction. ) R0:45: Remaining Tape Time Remaining tape time is indicated in minutes. (When it reaches less than 3 minutes, the indication starts flashing. ) CINEMA: Cinema Mode -17D. ZOOM: Digital Zoom -16MULTI: Multi Mode -20P-IN-P: P-IN-P Mode -20WIPE: Wipe Mode -20MIX: Mix Mode -20STROBE: Strobe Mode -20GAINUP: Gain-up Mode -20TRACER: Trailing Effect Mode -20MOSAIC: Mosaic Mode -20MIRROR: Mirror Mode -20NEGA: Negative Mode -20SEPIA: Sepia Mode -20B/W: Black & White Mode -20SOLARI: Solarisation Mode -20PB ZOOM: Playback Zoom -24SP: Standard Mode (Recording Speed Mode) -13- When you adjust shutter speed manually, this indication appears. -19SLIDE!: Slide Show Playback -32SLIDE;: Slide Show Playback Pause -32M. SLIDE!: Manual Slide Show Playback -32M. SLIDE;: Manual Slide Show Playback Pause -32F2. 4: When you adjust the F Number manually, this indication appears. -19AWB: Automatic White Balance Mode -181: White Balance setting Mode -18z: Outdoor Mode -18{: Indoor Mode (recording under incandescent lamp) -18C. NIGHT VIEW:Colour Night View Function -17Z. MIC: Zoom Microphone -15WIND CUT: Wind Noise Reduction -17æ: Progressive Photoshot Mode -15PICTURE: Picture -30TITLE: Title picture -33MPEG4: Moving Picture (MPEG4) -30VOICE: Voice data -300h00m00s: Recording time of MPEG4 or Voice data VOLUME: Volume adjustment -2215:30:45: Date/Time Indication -37N (F, E): Card Photoshot Picture Quality (during Card Photoshot recording) [F] means Fine, [N] means Normal and [E] means Economy. -29MPEG4 Picture Quality -30N, F : ACCESS: While Card is being read (during Playback, Formatting and Multi-Picture Function use). -28- 1/500: 0: LP: INDEX: S 1: 5k: AUTO: MNL: JUMP : [: MIC, AV IN: 12 bit, 16 bit: MF: ª: 5: 7: 4: : º: REC: PAUSE: !: ": ;: %: &: ~, }: ";, ;!: *, ): CHK: A. DUB !: A. DUB ;: PHOTO: BLANK: R !: 2k%: Long Play Mode (Recording Speed Mode) -13- Index signal recording -23Search Number -23Zoom Magnification Indication -15Automatic Mode -14Manual Mode -17-, -18-, -191. 3 Times Tele Jump Zoom Function -15Image Stabilizer -16Audio Dubbing Input Display -26Audio Recording Mode -13Manual Focus -19Back Light Mode -17Sports Mode (Programme AE) -17Portrait Mode (Programme AE) -17Low Light Mode (Programme AE) -17Spotlight Mode (Programme AE) -17Surf & Snow Mode (Programme AE) -17Recording -14Recording Pause -14Playback -22-/Forward Camera Search -14Reverse Camera Search -14Still Playback -23Fast-forward/Cue Playback -22Rewind/Review Playback -22Slow Motion Playback -22Still Advance Playback -23Index Search -23Recording Check -14Audio Dubbing -25Audio Dubbing Pause -25Photoshot Mode Recording -15Blank Search -23Repeat Playback -40Variable Speed Search -22- Remaining Number of Card Photoshot pictures -28R:0h00m: Remaining time of MPEG4 or Voice data : Lock Setting -34¥ (White): DPOF Setting completed (set to 1 or more picture) -35¥ (Green): Slide Show Settings completed -32¥ (Blue): DPOF Setting (set to 1 or more picture)/Slide Show Settings both completed -32-, -35[1280k960] Image size 1280 : [640k480] Image size 640 : For images not recorded with this Movie Camera, the size display is determined as follows according to the number of horizontal pixels. From 640 to 800 (The size is not displayed 640 : at under 640 pixels. ) From 800 to 1024 SVGA : From 1024 to 1280 XGA : From 1280 to 1600 SXGA : From 1600 to 2048 UXGA : Over 2048 QXGA : PICTURE (Cyan): Card Photoshot Mode PICTURE (Red): While Card Photoshot recording is activated PICTURE (Red): No Card (Still Picture Mode) MPEG4 (Cyan): Moving Picture (MPEG4) Recording MPEG4 (Red): While Moving Picture (MPEG4) recording is activated No Card (MPEG4 Mode) MPEG4 (Red): VOICE (Cyan): Voice Recording Mode VOICE (Red): While Voice Recording is activated VOICE (Red): No Card (Voice Recording Mode) ß (White): Video Flash turned on (setting to [NORMAL]) -19- ß (Yellow): ßi: ßj: When the Video Flash is turned off and the Flash Sensor determined that the light is needed -19Video Flash (setting to [i]) -19Video Flash (setting to [j]) -19- -36- Others £: Red Eye Reduction -20UNPLAYABLE TAPE (OTHER FORMAT): You are attempting to play back a tape section that has been recorded with a different TV system. DUB (LP RECORDED): Because the original recording was done in LP Mode, audio dubbing cannot be performed. INCOMPATIBLE TAPE: This Cassette is incompatible. PLEASE RE-OPERATE AFTER PUSHING RESET BUTTON: Mechanism Irregular is detected. CARD FULL: Card does not have sufficient memory remaining. Select Card Mode and delete unnecessary files. NO FILE: Card has no files recorded on it. UNPLAYABLE CARD: You are attempting to play back a data which is not compatible with this Movie Camera. CARD ERROR: This Card is not compatible with this Movie Camera. COPY INHIBITED: Because the medium is protected by a copy guard, images cannot be recorded correctly. INCORRECT OPERATION: You are attempting to record to a tape in VCR Mode. The [TAPE/CARD/CARD MODE] Selector is set to [MPEG4] or [VOICE] when [PHOTO SHOT] Button is pressed. You are attempting to record to a tape in Card Mode. ª To Change the Counter Display Mode By changing [C. DISPLAY] on the [DISPLAY SETUP] Sub-Menu, you can change the Counter Display Mode to Tape Counter Indication [COUNTER] (0:00. 00), Memory Counter Indication [MEMORY] (M0:00. 00), and Time Code Indication [TIMECODE] (0h00m00s00f). (-10-) By repeatedly pressing the [COUNTER] Button on the Remote Controller, you can change the Counter Display Mode. ª To Display Date/Time Indication To display Date/Time Indication, set the appropriate Date/ Time in [DATE/TIME] on the [DISPLAY SETUP] Sub-Menu. [. . . ] 43 Viewfinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 45 Voice Power Save . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Voice Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 ªG Gain-up Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]