User manual PANASONIC NV-J40B

[. . . ] (See preferred connection on page 3. ) Aerial Input socket Satellite Receiver 1Aerial Aerial Output socket To AC Mains socket 4 RF Input socket VCR 2 RF cable TV Aerial Input socket AC Input socket RF Output socket RF cable (supplied) Must be connected to watch TV channels. 3 To AC Mains socket AC Mains lead (supplied) 4 4 1 Connect the aerial to the aerial input socket of the Satellite Receiver. - If you do not have a Satellite Receiver, connect the aerial to the RF input socket of the VCR and go to step 3. DEO IN/ ENT RF / ANT OUT/ SORTIE Satellite Receiver 2 Connect the aerial from the Satellite Receiver to the RF input socket. Satellite Receiver VCR 3 IN/ ENT RF / ANT OUT/ SORTIE Connect the Aerial Output socket to the TV aerial socket. VCR TV 4 Plug the TV, VCR and Satellite Receiver into the mains as shown at the top of the page. Notes: Switch ON your Satellite Receiver; to ensure reliable tuning select either SKY ONE or SKY NEWS. If, after Auto Setup is complete, the programme position of the satellite receiver is not to your preference, or 'SAT' name is not shown in the Programme List, you can re-arrange the programme position and enter 'SAT' name manually. [. . . ] If your TV does not have a scart socket or you do not have a scart cable, skip this step. VCR TV 4 AV2 (DECODER/DECODEUR/EXT) Connect the AV2 21-pin scart socket to the VCR scart socket on your Satellite Receiver/Digital Receiver. If you are not connecting a Satellite Receiver, skip this step. VCR Satellite Receiver 5 Connect the TV scart socket of your Satellite Receiver to the AV1 scart socket of your TV. If you are not connecting a Satellite Receiver, skip this step. Satellite Receiver TV 6 Plug the TV, VCR and Satellite Receiver into the mains as shown at the top of the page. -3- Connections (with S-Video cables) Connections and preparations for a TV with a S-Video socket. This VCR uses the S-VHS format that makes it possible to obtain high resolution and high picture quality by using the high-performance S-VHS video cassette tapes. The conventional video sockets of VCRs output (input) a combination of the luminance signal (Y) and colour signal (C) which are recorded on the video tape. The new S (Separate)-Video Socket allows separate transmission of signals in order to obtain clearer pictures. The connection with the S-Video Cable can also be used for playing back a tape that was recorded in the conventional VHS system. The [S] in the [S-Video Socket] stands for [SEPARATED Y/C] not for [S-VHS]. VCR Aerial Input socket Audio Output sockets S-Video Output socket Aerial Audio Input sockets TV with S-Video Input socket AC Input socket Aerial Output socket Audio cables Aerial Input socket RF Cable AC Mains lead S-Video cable S-Video Input socket To AC Mains socket After completing the above connections, proceed to the Auto Setup page (Page 5). -4- Auto Setup START 1 VCR Display VCR TV Set the VCR/TV switch to VCR. Turn on the TV, then press the Standby/ON button to switch on the VCR. The first digit of the VCR display will begin to flash. ! EXIT ! If Auto Setup has previously been completed, this indication will not appear. In this case you can run Auto Setup again. In some cases, where the VCR has been connected to your TV using the RF cable only (no Scart) the RF output channel may interfere with the TV stations transmitted in your area. This may prevent you from seeing the On-Screen Display clearly. Please refer to page 6 for removing the interference before restarting Auto Setup (page 43 of Operating Instructions). If you want to cancel Auto Setup before it has finished, press the EXIT button. You can restart Auto Setup later, see page 43 of Operating Instructions. If the clock setting menu appears after Auto Setup has finished (Auto clock set was not possible due to a weak signal) PROG PLAY AUDIO REC 2 1 ENTER ENTER On-Screen Display Clock / Zeit Datumset 1 2 ENTER Press the Cursor buttons ( and date. ) to set the correct time MANUAL Time Date : 12 : 00 : 00 : 11. 03 Press the ENTER button to finish this setting. EXIT MENU ENTER : speichern :select :wählen ENTER : store EXIT : abbrechen :: exit zurück -5- Checking the Settings for Auto Setup To confirm that the TV Stations have been tuned correctly by Auto Setup MENU EXT LINK TV ASPECT TV/TEXT On-Screen Display Menu Timer recording Tuning Clock set Others 1 TRACKING/V-LOCK Press the MENU button to display the OSD Menu on the TV screen. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - CH VOLUME 2 1 INPUT SELECT Press the Cursor buttons ( press the ENTER button. ) to select [Tuning] then INDEX VIDEO Plus+ REC - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Tuning Manual Auto-Setup Shipping condition Owner ID PROG PLAY AUDIO 4 2, 3 3 ENTER ENTER 2, 3 CH PROG. /CHECK I-TIMER PDC SL/LP/EP TIMER OFF TIMER OSD/DISPLAY RESET/CANCEL Press the Cursor buttons ( ) to select [Manual] then press the ENTER button to display the list of tuned TV stations and confirm that all available TV stations have been set correctly. Positions 5 and 6 may differ from the example shown. [. . . ] If Channel 5 is received, it is usually found on programme position 5 and a connected satellite receiver on programme position 6. If Channel 5 is not received but a satellite receiver is connected, then the satellite receiver is found on programme position 5. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Tuning Pos Name Ch Pos Name Ch 1 2 3 4 5 BBC1 BBC2 ITV CH4 CH5 22 23 24 25 26 6 7 8 9 10 ---------------- ----------- EXIT 4 Press the EXIT button to exit the On-Screen Display. List of tuned TV stations (example) If the station names and/or channel numbers have not been set correctly. See page 40 of Operating Instructions for details. [. . . ]