User manual PANASONIC NV-MC6B

[. . . ] To prevent electric shock, do not remove cover. There are no user serviceable parts inside. Refer all servicing to qualified service personnel. Cautions before you operate this VCR Avoid: ­ Humidity and dust. ­ Extreme heat such as direct sunlight. [. . . ] Press the [OK] button again to conclude the settings. Press the [TIMER] button to switch the VCR over to the timer recording standby mode. ­ Check that [Á] is lit on the VCR display. If it is flashing, check the timer recording details again. (See page 15. ) r DATE s r ON s Press the [ON] button to set the starting time. ­ When it is kept pressed, the indication changes in 30-minute intervals. Press the [OFF] button to set the ending time. OK TIMER Á r OFF s SP/LP/EP Press the [SP/LP/EP] button to set the desired tape speed. ­ Regarding the [A] indication, refer to page 15. Press the [Cursor] buttons 3421 to set [VPS/PDC] to [ON] or [OFF] [jjj]. ­ See page 15 for VPS/PDC recording. To Suspend the Timer Recording Standby Mode Press the [TIMER] button so that the [Á] indication on the VCR display disappears. After you have finished using the VCR, be sure to reactivate the timer recording standby mode by pressing the [TIMER] button again, otherwise the programmed timer recording will not be performed. ­ The TV station must broadcast VPS/PDC signals. ­ The programme starting time must be set correctly to the starting time listed in the newspaper/magazine. To Check, Change or Cancel Timer Recording Programmings PROG. / CHECK Press the [PROG. /CHECK] button to display the timer recording programmings on the TV screen. ­ When the VCR is in the timer recording standby mode for a VPS/PDC recording, the On Screen Display may be distorted. Press the [Cursor] buttons 34 to select the programming that you want to change or cancel. To change or cancel timer recording programmings, use the [Cursor] buttons 3421, the [Channel], [DATE], [ON], [OFF] or [CANCEL] button. OK EXIT Press the [OK] button to conclude the setting. Press the [EXIT] button to exit the On Screen Display. 15 Search Functions Programme List Search ­ Each timer recording programming on the tape must be at least 15 minutes long. (25 minutes in the EP mode) Programme List Panasonic VCR Date Start 27/10 17:46 28/10 15:00 Editing Album Function The album function lets you collect desired scenes (both moving and still pictures) and create the equivalent of a photo album, but on video cassette. SEARCH Press the [SEARCH] button to display the Programme List menu. 1 2 Pos Name ZDF ARD Press the [Cursor] buttons 34 to select the programme that you want to locate and play back. SEARCH Press the [SEARCH] button to start the search for the beginning of the selected programme. ­ After the desired recorded programme has been found, playback starts automatically. ­ If, after playback has started, you want to search for the beginning of the same or another programme, press the [SEARCH] button. Playback stops, and the Programme List menu appears. Digital still camera Video movie camera To Cancel the Programme List Search EXIT Press the [EXIT] button. [. . . ] ­ The playback picture is distorted when you record the tape in the EP mode using MESECAM system. We recommend PAL system for recording in the EP mode. ­ During high speed cue and review playback (JET SEARCH), the tape transport noise will increase. However, this is not a malfunction. Recording Is Not Possible or Does Not Work Properly [When recording is attempted, the 1 indication flashes. ] ­ A video cassette with a broken out erasure prevention tab is used. [. . . ]