User manual PANASONIC NV-MD10000GC

[. . . ] Before use, please read these instructions completely. As this equipment gets hot during use, operate it in a well-ventilated place; do not install this equipment in a confined space such as a bookcase or similar unit. To reduce the risk of fire, electric shock or product damage, do not expose this equipment to rain, moisture, dripping or splashing and ensure that no objects filled with liquids, such as vases, shall be placed on the equipment. Do not remove the cover (or back); there are no user serviceable parts inside. [. . . ] 10 minutes or more, then the playback will automatically stop. If you do not hear the sound, check the settings of [SETUP] >> [12bit AUDIO]. (In order to cancel the repeat playback mode, set [REPEAT PLAY] >> [OFF] or set [OFF/ON] switch to [OFF]. ) ª Settings on the audio If you cannot listen to the desired audio when playing back a tape, check the settings in [SETUP] >> [12bit AUDIO]. When you record or dub the audio in [12bit] and set [SETUP] >> [12bit AUDIO] >> [MIX], the audio will be played back in stereo sound regardless of the settings in [AUDIO OUT]. Pushing the [W/T] lever (or sub zoom lever) towards [T] (normal direction) or towards [W] (reversed direction) of this camera during playback pause also turns into the frame-byframe playback. If you keep pushing the lever, then the images will continuously be played back frame by frame. Frame-by-frame playback Press and hold the [E] or the [D] button in the playback pause, and then the images will continuously be played back frame by frame. The speed of cue/review playback can be varied. (This operation is only available when using the remote control. Images recorded by this camera can be played back on a TV. This function is cancelled when the operation icon is displayed. Connect the movie camera and a TV by using the AV cable 1. if the TV has an S-Video terminal , then also connect an S-Video cable 2. It allows you to enjoy more beautiful images. Turn on this camera and set the mode switch to the Tape Playback Mode. Use the AC adaptor to free you from worrying about the battery running down. ª If the image or audio from this camera is not Check that the plugs are inserted as far as they go. (For more information, please read the operating instructions for the TV. Pictures recorded by the movie camera can be stored on a DVD-RAM or other such media. For more information, refer to the operating instructions for your TV set and recorder. When you do not need functional indications or date and time indications, press the [OSD] button on the remote control for no indication. [. . . ] The movie camera determines the hue of light that comes through the lens and white balance sensor, thereby judging the recording condition, and selects the closest hue setting. This is called automatic white balance adjustment. However, since the movie camera only stores white colour information under several light sources, automatic white balance adjustment does not function normally under the other light sources. ª White balance The image recorded by the movie camera may become bluish or reddish under the influence of light sources. [. . . ]