User manual PANASONIC NV-MV16

[. . . ] Contents Page Video Cassette Recorder Operating Instructions VHS PAL 625 NV-SV121 Series (S-VHS, Hi-Fi) NV-HV61 Series (Hi-Fi) NV-MV21 Series (Mono) NV-HV51 Series (Hi-Fi) NV-MV16 Series (Mono) Super VHS EJECT SUPER LP . 35x JET SEARCH TIMER REC REC 3D DNR PULL OPEN CH TBC ET Before connecting the device, operating it or adjusting settings please read these operating instructions completely; especially the safety precautions on pages 2-3. Included Accessories 2 Inserting Batteries Safety Precautions 3 Front Panel VCR 4 Rear Panel VCR 5 Remote control functions 6- 7 Connecting with a 21-pin Scart cable 8 VCR Auto Setup with 21-pin Scart cable Connecting with S-VIDEO cable 9 VCR Auto Setup with S-VIDEO cable Connecting with RF Coaxial cable 10 VCR Auto Setup with RF Coaxial cable Channel tuning / Correcting interferences 11 Setting Time and Date External Devices Connecting a Set Top Box, satellite receiver, 12 decoder or a second recorder Connecting an amplifier, Connecting to the AV3 input 13 Menu 14 Manual Setup Creating a new station table 15 Changing the name and order of TV stations 16 Creating a new station table 17 Shipping condition/factory defaults Menu Others 18-19 Recording 20 Timer recording 21-22 Recording with INTELLIGENT TIMER 23 Recording with ShowView 24 Recording with external recording controls 25 Playback 26 General convenient functions 27-28 NICAM sound system, NTSC playback 29 Before requesting service 30 Specifications 31 Index last page Dear customer Thank you for your trust and your decision to purchase this top-quality device. Panasonic is one of the leading manufacturers of entertainment electronics devices. We are sure that you will be completely satisfied with this device. [. . . ] VIDEO S-VIDEO : Video signal via the 21-pin scart cable. : S-Video signal via the 21-pin scart cable. AV2 IN AV1 OUT TV system AUTO : Automatically detects PAL or MESECAM. MESECAM : If you are using the MESECAM system. AUTO ON OFF 4:3 : The VCR automatically detects the type of recording. : Plays back S-VHS format cassettes in the S-VHS format only. : Plays back cassettes recorded in VHS format only. : Displays appear at the edge of the screen (displays not visible on 16:9 format screens). : Displays appear at the edge of the screen (displays appear in the middle on 4:3 format screens). : The VCR automatically detects the type of recording. : Plays back S-VHS format cassettes in quasi S-VHS format. : Plays back cassettes recorded in VHS format only. S-VHS playback HV51EG MV21 MV16 Others Tape length TV system SQPB OSD Power save VCR display EXT LINK : : : : : : : AUTO ( E-240) AUTO AUTO 4:3 OFF DIMMED 2 OSD WIDE OFF AUTO ON OFF SQPB 18 Menu Others SV121 Others Power save VCR display S-VHS REC S-VHS ET REC EXT LINK 2/2 : : : : : OFF DIMMED ON OFF 2 Press to display the 2nd screen. ON : The video recorder's display unit is off. In Power save mode, you cannot change the VCR display setting. To control an external appliance via AV2 Scart socket, the VCR first needs to be switched on. : Factory setting; you can change the VCR display setting. Power save Only in stand-by mode OFF Available only if the unit is not in Power save mode. VCR display Only in stand-by mode DIMMED : The video recorder's display is dimmed. ON : The video recorder's display unit is on at normal brightness. In conjunction with the PAL TV system only. ON : For S-VHS format recordings on a S-VHS type cassette. OFF : For VHS format recordings on a S-VHS type cassette. In conjunction with the PAL TV system only. : Takes recordings at a higher picture quality on VHS-HG cassettes. OFF : Takes standard quality recordings. [. . . ] Stick adhesive tape over the gap if you wish to re-record a protected cassette. 28 NICAM sound system Tuning Pos Name ARD ZDF N3 RTL SAT1 A : delete : select MENU : return 1 2 3 4 5 Ch 7 4 2 12 13 B EXIT ENTER SV121EC HV61EC HV51EC Select Mono: [ON] to record mono sound to the Hi-Fi audio tracks of the VCR, or if the quality of stereo sound reception is bad. Pos Name 6 7 8 9 10 VOX PRO7 RTL2 KABE S-RTL Ch 8 95 85 97 98 !! ! ! Press MENU, the Menu screen appears. With select the Tuning menu and confirm with ENTER. With select the desired channel and confirm with ENTER. [. . . ]