User manual PANASONIC NV-RS7EG

[. . . ] Before use, please read these instructions completely. To reduce the risk of fire or shock hazard and annoying interference, use only the recommended accessories and do not expose this equipment to rain or moisture. Do not remove the cover (or back); there are no user serviceable parts inside. As this equipment gets hot during use, operate it in a well ventilated place; do not install this equipment in a confined space such as a book case or similar unit. [. . . ] If there is a power interruption, the Motion Sensor Function is cancelled. This function is convenient when you want to record at night in places without any illumination, for example for observing the behaviour of nocturnal animals, etc. In this mode, the Movie Camera emits infrared rays which makes it possible to record subjects that are invisible to the naked eye. Be careful not to cover them with your hand when recording. Do not use the 0 Lux Night View Function in brightly lit places and never aim the Movie Camera against the sun, as this could cause irreparable damage. The playback picture of scenes recorded with the 0 Lux Night View Function will be in black and white. If you change the setting of the [0 LUX OFF/ON] Switch during recording, a switching noise is also recorded. When recording with the 0 Lux Night View Function, it is not possible to adjust the white balance manually or to cancel the manually adjusted white balance setting. It is not possible to use any of the Programme AE Modes when the 0 Lux Night View Mode is activated. When using the 0 Lux Night View Function, the subject should be within 3 metres from the Movie Camera. When the automatic focusing is not precise, adjust the focus manually. If you do not want the Tally Lamp to light during recording using the 0 Lux Night View Function, set [TALLY LAMP] on the [CAMERA SETUP] Sub-Menu to [OFF]. As the iris is fully opened in the 0 Lux Night View Mode, subjects in white or other light colours may be recorded whitish, blurred and with weak contrast. Using the 0 Lux Night View Function together with the Motion-Sensor-Controlled Recording Function in Dark Places without Any Illumination If you use the 0 Lux Night View Function together with the Motion-Sensor-Controlled Recording Function, recording starts automatically when the Movie Camera's built-in Motion Sensor detects some movement in the picture. This combined function is convenient for easy, unattended animal observation recordings at night. Turn the [34 Dial to select [CAMERA SETUP] 34] 34 and then press the [SET] Button. Cancelling the 0 Lux Night View Function and MotionSensor-Controlled Recording Function during Recording Press the Recording Star t/Stop Button for more than 2 seconds and then set the [0 LUX OFF/ON] Switch to [OFF]. If you use the Motion Sensor Function together with the 0 Lux Night View Function, the [MOTION SENSOR] Indication flashes, and recording may not be possible in some cases. The following subjects and recording situations are not suitable for recording in the Full Auto Mode. In these cases, adjusting the white balance and/or focus manually will provide more beautiful pictures. White Balance To adjust the white balance manually, see "Recording with Manual White Balance Adjustment". During recording, it is not possible to change the recording mode ([AUTO], [5], [7], [4], [ ], [ ]), even if you press the [PROG. [. . . ] Shoe Adaptor (for attaching the IR/Video DC Light) Some accessories are not available in some countries. Consumo de corriente: (Funcionamiento con batería) S-VHS-C/VHS-C Cassette 1 hour with EC60 CCIR; 625 lines, 50 fields PAL colour signal VIDEO OUT (PHONO); 1. 0 Vp-p , 75 ohm terminated S-VIDEO OUT; Y Output: 1. 0 Vp-p, 75 ohm terminated C Output: 300 m Vp-p, 75 ohm terminated AUDIO OUT (PHONO); p6 dBV (47 kohm loaded)/ less than 1 kohm 1 track (Normal ­ Monaural) 1/5-inch CCD Image Sensor 20:1 Power Zoom Lens (Optical capability) F1. [. . . ]