User manual PANASONIC NV-RX10EG

[. . . ] AC Adaptor The rating plate is on the underside of the AC Adaptor. As this equipment gets hot during use, operate it in a well ventilated place; do not install this equipment in a confined space such as a bookcase or similar unit. IMPORTANT The wires in this mains lead are coloured in accordance with the following code: Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal in the plug which is marked with the letter L or coloured RED. Under no circumstances should either of these wires be connected to the earth terminal of the three-pin plug, marked with the letter E or the Earth Symbol Ó. [. . . ] 46) 2 3 This prevents shaky pictures when recording in the tele range or from a moving vehicle. 46) It enlarges the subject beyond the optical zooming range. Super Image Stabilizer and Digital Zoom Mode [SIS_D. ZOOM] (p. 46) This combination mode allows recording in the extreme tele range and prevents shaky picture. Mosaic Mode [MOSAIC] The picture becomes mosaic-like. Stretch Mode [STRETCH] The picture is stretched horizontally while its height remains unchanged. 4 5 44 1 2 250 D. ZOOM 3 250 D. ZOOM 4 5 MOSAIC STRETCH 6 7 8 9 : NEGA SOLARI SEPIA B/W D. FADE1 BLK ; < D. FADE2 WHT D. FADE3 BLK Remarks, etc. 3 Press the [SET] Button to select the desired digital effect. 4 Press the [MENU] Button to exit the Menu. MENU When you select the Super Image Stabilizer Mode, the [[] Lamp lights. When you select any other digital effect, the [©] Lamp lights. If you set the [CAMERA/OFF/VCR] Switch to [OFF] and then set it to [CAMERA] again, the indication of the selected digital effect flashes for a few seconds to inform you of the selected setting. If you have set [EFFECT2] on the [DIGITAL EFFECT] Sub-Menu to [SEPIA] or [B/W], it is not possible to manually adjust the white balance. 52) FOCUS / SET Cancelling the Digital Effect Set [EFFECT1] or [EFFECT2] on the [DIGITAL EFFECT] Sub-Menu to [OFF]. Digital Effects 2 [EFFECT2] 6 Negative Mode [NEGA] 7 8 9 : The recorded pictures have reversed colours similar to photographic negatives. Solarisation Mode [SOLARI] The picture is recorded with an effect similar to a painting. The [©] Lamp lights. MENU 1 D. FADE1 BLK D. FADE1 BLK D. FADE1 BLK MF/ TRACKING FOCUS / SET 1 2 D. FADE2 WHT D. FADE2 WHT D. FADE2 WHT 3 To Fade in: With the Movie Camera in the Recording Pause Mode, keep the [FADE] Button pressed. The picture gradually disappears. 4 When the picture has completely disappeared, press the Recording Start/Stop Button to start recording. 3 D. FADE3 BLK D. FADE3 BLK D. FADE3 BLK 3 To Fade out: During recording, keep the [FADE] Button pressed. The picture gradually disappears. 4 After the picture has completely disappeared, press the Recording Start/Stop Button to stop recording. CAMERA OFF VCR FADE 48 Remarks, etc. 2 Cancelling the Selected Digital Fade Function Set [EFFECT2] on the [DIGITAL EFFECT] Sub-Menu to [OFF]. The colours of the Digital Fade change in the following order: BLK (Black) FADE While keeping the [FADE] Button pressed, repeatedly press the [COLOUR] Button until the desired colour 1 is displayed. WHT (White) GRN (Green) YEL (Yellow) CYN (Cyan) MAG (Magenta) RED (Red) COLOUR BLU (Blue) 5 Approximately 3-4 seconds after the recording has started, release the [FADE] Button. The picture gradually appears again. 5 Release the [FADE] Button. FADE 49 Advanced Operations DATE/ TITLE CAMERA OFF VCR MENU MF/ TRACKING FOCUS / SET Title Procedure Recording with Pre-programmed Titles Inserted in the Picture You can insert one of 10 pre-programmed titles when recording of special occasions such as weddings and birthday parties. These titles are available in 6 languages. Be sure to turn the Movie Camera off before removing the Battery or disconnecting the AC Adaptor. Disconnecting the power supply while the Movie Camera is on erases the Date/Time/Title Indication stored in memory. 1 After displaying the [TITLE SETUP] Sub-Menu. . . (p. 12) 2 Turn the [34] Dial to select [LANGUAGE FOR TITILE] 1. MF/ TRACKING Press [SET] Button repeatedly to select the desired language. FOCUS / SET 5 Turn the [34] Dial to select [COLOUR] 3. 6 Press the [SET] Button repeatedly to select the desired colour. MF/ TRACKING FOCUS / SET 9 Press the [MENU] Button to exit the Menu. MENU 50 1 TITLE SETUP DATE/TITLE DATE TIME TITLE TITLE HAPPY BIRTHDAY LANGUAGE FOR TITLE ENGLISH SIZE NORMAL COLOUR YELLOW 3 TITLE SETUP DATE/TITLE DATE TIME TITLE TITLE HAPPY BIRTHDAY LANGUAGE FOR TITLE ENGLISH SIZE NORMAL COLOUR YELLOW RETURN PRESS ---TO EXIT CAMERA FUNCTIONS 1. CAMERA SETUP 2. DIGITAL EFFECT 3. TITLE SETUP 4. DATE/TIME SETUP 5. DISPLAY SETUP 6. LCD/EVF SETUP 7. OTHER FUNCTIONS PRESS MENU TO EXIT RETURN ---PRESS MENU TO EXIT MENU 2 TITLE SETUP 4 TITLE SETUP DATE/TITLE DATE TIME TITLE TITLE HAPPY BIRTHDAY LANGUAGE FOR TITLE ENGLISH SIZE NORMAL COLOUR YELLOW RETURN PRESS ---TO EXIT DATE/TITLE DATE TIME TITLE TITLE HAPPY BIRTHDAY LANGUAGE FOR TITLE ENGLISH SIZE NORMAL COLOUR YELLOW RETURN PRESS ---TO EXIT MENU MENU Remarks, etc. 3 Turn the [34] Dial to select [TITLE] 2. 4 Press the [SET] Button repeatedly to select the desired title. Repeatedly pressing the [SET] Button changes the language of the title in the following order: [ENGLISH] l [GERMAN] l [FRENCH] l [ITALIAN] l [SPANISH] l [RUSSIAN] l [ENGLISH] l Repeatedly pressing of the [SET] Button changes the title in the following order: (In the other available languages, they are arranged in the same order. ) [HOLIDAY] l [HAPPY BIRTHDAY] l [WEDDING] l [FAMILY] l [PARTY] l [THE END] l [CONGRATULATIONS] l [MERRY CHRISTMAS] l [HAPPY MEMORIES] l [HAPPY NEW YEAR] l [HOLIDAY] l You can select the colour of the title from among 8 colours. Repeatedly pressing the [SET] Button changes the colours of the title in the following order: WHITE BLACK YELLOW BLUE MAGENTA GREEN RED CYAN MF/ TRACKING FOCUS / SET 7 Turn the [34] Dial to select [SIZE] 4. 8 Press the [SET] Button repeatedly to select [NORMAL] or [LARGE]. MF/ TRACKING FOCUS / SET Deleting the Pre-programmed Title Indication During recording or when the Movie Camera is in the Recording Pause Mode, press the [DATE/TITLE] Button to make the Title Indication disappear. To make it appear again, press the [DATE/TITLE] Button. When a large-size title is displayed, some indications do not appear even if the corresponding modes are activated. [. . . ] 8) P2: S2: No operation except taking out the cassette can be performed. Is the Condensation Indication [3] displayed?If condensation has formed inside the Movie Camera, it automatically switches off and prevents all operations except taking out the cassette. Wait until the Condensation Indication disappears. [. . . ]