User manual PANASONIC NV-RX2B

[. . . ] Read the Operating Instructions and use the Movie Camera correctly. Injury or material damage resulting from any kind of use that is not in accordance with the operating procedures explained in these Operating Instructions are the sole responsibility of the user. please note that the actual controls and components , menu items , etc. Of your Movie Camera may look somewhat different from those shown in the illustrations in these Operating Instructions. [. . . ] When the automatic focusing is not precise, adjust the focus manually. If you do not want the Tally Lamp to light during recording using the 0 Lux Night View Function, set [TALLY LAMP] on the [CAMERA SETUP] Sub-Menu to [OFF]. As the iris is fully opened in the 0 Lux Night View Mode, subjects in white or other light colours may be recorded whitish, blurred and with weak contrast. Using the 0 Lux Night View Function together with the Motion-Sensor-Controlled Recording Function in Dark Places without Any Illumination If you use the 0 Lux Night View Function together with the Motion-Sensor-Controlled Recording Function, recording starts automatically when the Movie Camera's built-in Motion Sensor detects some movement in the picture. This combined function is convenient for easy, unattended animal observation recordings at night. Turn the [34 Dial to select [CAMERA SETUP] 34] 34 and then press the [SET] Button. Cancelling the 0 Lux Night View Function and MotionSensor-Controlled Recording Function during Recording Press the Recording Star t/Stop Button for more than 2 seconds and then set the [0 LUX OFF/ON] Switch to [OFF]. If you use the Motion Sensor Function together with the 0 Lux Night View Function, the [MOTION SENSOR] Indication flashes, and recording may not be possible in some cases. The following subjects and recording situations are not suitable for recording in the Full Auto Mode. In these cases, adjusting the white balance and/or focus manually will provide more beautiful pictures. White Balance To adjust the white balance manually, see "Recording with Manual White Balance Adjustment". Use this mode for special subjects and recording conditions, such as listed (l 108), for which the Full Auto Mode is not suitable. AE] Button repeatedly until an indication other than [AUTO] appears. Keep the [W/T] Zoom Lever pushed toward [T] to zoom in on the subject 1. Zooming in on the subject before adjusting the focus ensures that the subject remains precisely focused even when you later zoom out 2. ) Pressing the [FOCUS] Button after performing steps 1 and 2 above also activates the Manual Focus Adjustment Function, and the [MF] Indication appears even before you turn the [MF] Dial. Push the [W/T] Zoom Lever toward [W] to zoom out as desired. It is not possible to adjust the focus when a menu is displayed. Cancelling the Manual Focus Mode Press the [FOCUS] Button once to make the [MF] Indication disappear. This Movie Camera gives you a choice of 5 different automatic exposure programmes optimized for typical recording situations. To record scenes with fast-moving subjects such as sports scenes. To make subjects stand out sharply from the background. [. . . ] 0 W (When using LCD Monitor) S-VHS-C/VHS-C Cassette 1 hour with EC60 CCIR; 625 lines, 50 fields PAL colour signal VIDEO OUT (PHONO); 1. 0 Vp-p , 75 ohm terminated S-VIDEO OUT; Y Output: 1. 0 Vp-p, 75 ohm terminated C Output: 300 m Vp-p, 75 ohm terminated AUDIO OUT (PHONO); p6 dBV (47 kohm loaded)/ less than 1 kohm 1 track (Normal ­ Monaural) 1/5-inch CCD Image Sensor 20:1 Power Zoom Lens (Optical capability) F1. Weight and dimensions shown are approximate. [. . . ]