User manual PANASONIC NV-RZ10EN

[. . . ] This VCR has an On Screen Display (OSD) function which allows for various settings. The main operation buttons used in the function are listed below. SETUP: To make the SETUP screen appear on the TV. OK: To confirm the selection, or to store. [. . . ] If the playback unit is connected to the recording unit via an S-VIDEO cable, the video signal on the S-VIDEO cable takes priority. If the playback unit does not have an S-VIDEO socket, do not connect the S-VIDEO cable to the NV-DV2000. If one of either the 21-pin Scart cable or the AV cables is connected, it is not necessary to connect the other. If both cables are connected, electronic noise may be generated when the playback VCR and the recording VCR are in stop mode. Although this noise will not have any effect on the actual editing operations, if it does become annoying, set INPUT SELECT on the playback VCR to a position for which no cable is connected. 32 Read the operating instructions of the playback unit. Do not change the Edit Terminal or Edit Mode settings while performing setting or editing operations at SET UP or EDIT MENU screens. Be sure to quit these screens before changing these settings. When using this VCR as the recording VCR and performing editing by connecting the units via the AV cables or a 21-pin Scart cable, the On Screen Display (date/time, Time Code) may scroll vertically when still playback or slow playback are performed by the playback VCR. Playback Unit [S-VHS (VHS) Video Equipment with an Edit socket] 1 2 Turn on the Video Equipment. Recording VCR (the NV-DV2000) 1 2 Turn on the VCR. Press INPUT SELECT so that A2, A3 or A4 is selected. Set the unit so that it is ready to be controlled. Read the operating instructions of the playback unit and make the necessary settings. 3 4 Hint: When the "TBC" and "REC 3D DNR" functions activate, you can record with the clear pictures. When performing Audio Dubbing, Audio Mixing or AV Insert, select A2, A3 or A4. Preparations for Editing 35 Settings for Editing This VCR also allows some settings for editing to be made at the On Screen Display (OSD). Audio mode DIGITAL VCR Operations 1 Press SET UP. SET UP Edit functions VCR functions Clock setting Shipping conditon 2 Press 34(CURSOR) to select Edit functions and press OK. Press 34(CURSOR) to select Audio mode and press OK. 3 Edit functions Search with Sound Audio mode One-Touch-Edit Still Album Preparations ¡ Confirm that the TV is on and the VCR viewing channel is selected. ¡ Complete necessary connections and settings. [R28­35] 4 Press 21 (CURSOR) to select 12bit or 16bit, and then press OK. Audio mode 12bit 16bit Search with Sound Operations 1 Press SET UP. On Screen Display SET UP Edit functions VCR functions Clock setting Shipping conditon 12bit: 2 Press 34(CURSOR) to select Edit functions and press OK. Edit functions 3 Press 34(CURSOR) to select Search with Sound and press OK. Search with Sound Audio mode One-Touch-Edit Still Album 16bit: 4 Press 34(CURSOR) to select OFF, EDIT ONLY or ALWAYS ON, and then press OK. Search with Sound OFF EDIT ONLY ALWAYS ON Divides the audio area into two stereo audio tracks and four channels: STEREO1 (L-R) and STEREO2 (L-R). If a recording is made in 12bit audio mode, the sound is recorded on STEREO1 only, and is not recorded on STEREO2. STEREO2 is used to record new audio that is added through Audio Dubbing or Audio Mixing. The whole audio area is used so that the sound will be recorded with a superior quality. 5 Press EXIT to exit the On Screen Display. OFF: EDIT ONLY: ALWAYS ON: The sound cannot be heard during special playback. The sound can be heard during special playback only when an editing operation is in progress. The sound can be always heard during special playback. 5 Press EXIT to exit the On Screen Display. 36 Setting for One-Touch-Edit Operations 1 Press SET UP. 2 Press 34 (CURSOR) to select Edit functions and press OK. SET UP Edit functions VCR functions Clock setting Shipping conditon Edit functions 3 Press 34 (CURSOR) to select One-TouchEdit and press OK. Search with Sound Audio mode One-Touch-Edit Still Album One-Touch-Edit 4 Press 21 (CURSOR) to select OFF or ON, and then press OK. OFF ON Select this whenever you are performing any editing function other than One-Touch-Edit. ON: Select this in order to perform OneTouch-Edit. [. . . ] "VCR display is not illuminated. " ` Mains lead is not connected. [R23] Playback does not operate correctly The symptom description is indicated in quotation " "The playback picture contains rectangular blocks of picture noise or the whole screen becomes black. " ` Video heads are clogged or worn. Use the Digital Video Head Cleaner supplied with the VCR. [R4] If the picture is still not clear after using it, consult your dealer for further advice. [. . . ]