User manual PANASONIC NV-RZ9EU

[. . . ] The Movie Camera uses copyright-protected technologies and is protected by the patented technologies and intellectual properties of Japan and the U. S. To use these copyright-protected technologies, authorization of the Macrovision Company is required. It is prohibited to disassemble or modify the Movie Camera. Pages for reference Pages for reference are indicated by dashes either side of a number, for example: -00- ª WARNING Do not remove the cover (or back); there are no user serviceable parts inside. [. . . ] The Wipe Function and Mix Function can be used only from the Remote Controller during playback. If the [OFF/ON] Button (61) is pressed while Wipe or Mix is carried out, the effect will stop temporarily at that point. Pressing the [OFF/ON] Button (61) again will bring back the effect. For other notes concerning this item, see -39-. Playback Digital Effect Functions During playback, special digital effects can be added to the recorded pictures. The same effects as those of Digital Effects 1 and 2, which are used during recording, are obtained. 1 Press the [1] Button (72). (72) V /REW PLAY FF/W sV 6 1 5 W STILL ADV PAUSE STILL ADV E INDEX K S C ; STOP D INDEX L P. B. ZOOM 2 Press the [SELECT] Button (59) on the Remote Controller to select a desired digital effect. (59) SELECT VAR. SEARCH ENTER MENU STORE Playing Back on Your TV By connecting your Movie Camera with your TV, the recorded scenes can be viewed on your TV screen. Before connecting them, turn off the power of both the Movie Camera and TV. 1 Connect the [A/V OUT] Socket of the Movie Camera and the Video and Audio Input Sockets of the TV. (61) OFF/ON P. B. DIGITAL When the [SELECT] Button is pressed repeatedly, the digital effect selection changes. The same setting can be done using [EFFECT SEL] Sub-Menu on the [TAPE PLAYBACK MENU]. To suspend Playback Digital Effect Temporarily Press the [OFF/ON] Button (61) to suspend or restart the digital effect. Movie Camera: 6 Press the [] Button to stop playback. Using the DV Cable for Recording (Digital Dubbing) By connecting this Movie Camera to other digital video equipment that has a DV Input/Output -33- Editing Mode Terminal with a DV Cable VW-CD1E (optional) 1, dubbing can be done in the digital format. DV s Set [CAMERA] >> [USB FUNCTION] >> [DV STUDIO]. STILL ENTER FADE i (14) MENU 1 Only the NV-GS33 can be used as a Recorder. Player/Recorder: 1 Insert the Cassette and set to Tape Playback Mode. Player: 2 Press the [1] Button (72) to start playback. sVOL r It enters WEB CAMERA Mode or DV STUDIO Mode. 4 Connect the supplied USB Cable to Socket (27). MULTI/ P-IN-P V T ¥REC A. DUB FF/W (54) W S-VIDEO OUT (72) (69) (70) /REW PLAY 6 1 5 STILL ADV PAUSE STILL ADV (27) P. B. ZOOM E INDEX K ; STOP D INDEX L 5 Start the Windows Messenger or DV STUDIO. When using as a web camera, it is not possible to record on a tape or display a title. For more details on the operating environment, installation, connections, and procedures, please refer to USB Connection Kit's operating instructions. Recorder: 3 While pressing the [REC] Button (54), press the [PLAY] Button (72). Or while pressing the [REC] Button (7), press the [BACK LIGHT] Button (8) on the Movie Camera. Recording starts. To Stop Dubbing Press the [;] Button (69) or the [] Button (70). For other notes concerning this item, see -40-. Using as a Web Camera or with DV STUDIO If the Movie Camera is connected to your Personal Computer, you can send video from the Movie Camera to other parties via the network. Do not connect the USB Cable until the USB driver or Web Camera driver is installed. 1 Install the supplied USB driver or Web Camera driver. [. . . ] Compatibility with S-VHS or VHS Cassettes Because this Movie Camera employs a digital system for recording image and sound data, it is not compatible with conventional S-VHS or VHS video equipment that employs an analog recording system. The size and shape of the Cassettes are also different. Compatibility with Output Signals Because AV signal output from the AV signal output socket is analog (the same as conventional video systems), this Movie Camera can be connected with S-VHS or VHS video or a TV for playback. ª Time Code Time Code signals are data that indicate time measured in hours, minutes, seconds, and frames (25 frames per second). If this data is included in a recording, an address is assigned to each image on the tape. [. . . ]