User manual PANASONIC NV-SD270B

[. . . ] You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Date of Purchase Dealer purchased from Dealer Address Dealer Phone No. NV-FJ610AR/ARU NV-SJ410AR/ARU CVC (Crystal View Control) Indicator The crystal view control function ensures that you always obtain the optimum picture quality so that you get the best picture automatically. While the VCR is turned on, the CVC indication is always displayed to show that the Crystal View Control is activated. Longrun Head System This longrun head system enables approximately 8, 000 hours of recording/ playback with high quality images. [. . . ] To continue normal playback, press 1 (PLAY). 7 Stop viewing the picture by pressing (STOP). W X r DATE r ON r OFF s s s Note: If you keep 5 (FF) or 6 (REW) pressed in step 3 or 4, search playback is activated while the button is pressed, and operation returns to normal playback when the button is released. 25 Basic operations 5, 6 2 3 To Obtain a Higher Speed Picture than Cue, Review (Jet Search) Press JET SEARCH 5 or 6 to search forward or backward during playback or in the stop mode. (For NV-FJ610AR/ARU) Press 5 (CUE) or 6 (REW) twice to search forward or backward during playback. (For NV-SJ410AR/ARU) Select search speed to view the picture recorded. (See page 23. ) The picture that appears in the LP or EP mode at approx. A vertical scroll may happen due to combination with the TV monitor. It is not a malfunction but if it happens, change to approx. Jet Search function also works during fast forward or rewind. The picture may not be in color or be distorted depending on TV. Press 1 (PLAY) to cancel the Jet Search. EJECT STOP PLAY TIMER REC REC/OTR SEARCH 6 / REW FF / 5 Other Playback Functions To Stop Playback Automatically (Playback Off Timer Function) Whenever you are playing back and wish to stop the tape automatically, simply set the playback duration by pressing 1 (PLAY) on the VCR repeatedly. The duration indicated on the VCR display changes by pressing 1 (PLAY) as follows. 5 Press (STOP) to stop recording. 2 § Set VCR/TV switch to VCR for using POWER Í, the I and J buttons and the numeric buttons. For NV-SJ410AR/ARU Í AV r s X W VCR Í INPUT SELECT VCR/TV AUDIO OSD/DISPLAY RESET PICTURE MODE MENU X INDEX : 9 REC ¥ 3 NAVI 2 3 4 5 REC 1 2 6 OK 5 1 ;/D PROG/CHECK CANCEL 4 SEARCH SPEED TIMER Á 28 To Select the Desired Tape Speed Press SPEED before recording. SP For NV-FJ610AR/ARU SEARCH PICTURE MODE MENU REC To Interrupt Recording Press ;/D (PAUSE/SLOW) during recording. Press it again to continue recording. OK REC VCR TV 1 2 3 4 r r ON r OFF To View One TV Program while Recording Another One 1 Refer to steps 1­4 of the manual recording operation. 3 Select the TV program on your TV that you wish to view now. For NV-FJ610AR/ARU Ensure that VCR/TV switch is set to TV. DATE s PROG. / CHECK CANCEL s SPEED s TIMER Á AUDIO RESET OSD/DISPLAY VCR/TV For NV-SJ410AR/ARU Í AV s VCR Í OSD/DISPLAY RESET PICTURE MODE AUDIO INPUT SELECT VCR/TV X W X INDEX : 9 REC ¥ To Display the Approximate Remaining Tape Time 1 Select TAPE SELECT from the on screen display and select the corresponding video cassette tape length. See page 22. OPTION MENU 3 NAVI 1 2 6 On Screen Display OSD ON TAPE SELECT T120 T160 T180 BLUE BACK ON OFF JET NAVIGATOR ON OFF DELETE NAVIDATA NO YES JET SEARCH x27 x35 SELECT END : s/r: :MENU 1/2 OFF OK 5 1 ;/D PROG/CHECK CANCEL 1 2 4 SEARCH SPEED 3 TIMER Á 4 W r DATE r ON r OFF T120: For T30, -60, -90 and -120 tapes. T180: For T180 tape. REMAIN 2 Press OSD/DISPLAY. The display changes as follows each time OSD/DISPLAY is pressed. Clock>Counter> Remaining Tape Time>Clock The remaining tape time may not be displayed correctly depending on the tape used. Notes: When a video cassette with a broken off erasure prevention tab is inserted, the "1" indication will flash to indicate that recording is not possible even if REC ¥ (¥ REC/OTR) is pressed. The recording pause mode will be automatically released after 5 minutes, and the VCR will return to the stop mode. 29 Basic operations AV1 (AUDIO IN/ VIDEO IN) EJECT STOP PLAY IN (AV1) OUT IN VIDEO L RF TIMER REC REC/OTR SEARCH 6 AUDIO R OUT FF / 5 / REW 2 One-Touch Recording (OTR) Whenever you are in a hurry to start a timer recording with automatic stop in your absence, simply set the recording duration by pressing ¥ REC/OTR repeatedly. [. . . ] Avoid Water Keep the VCR away from flower vases, tubs, sinks, etc. If liquids are spilled into the VCR, serious damage could occur. If you spill any liquid into the VCR, consult qualified service personnel. Lightning To avoid damage by lightning, disconnect the aerial plug from the VCR. [. . . ]