User manual PANASONIC NV-SJ400A

[. . . ] Video Cassette Recorder NV-SJ400A Operating Instructions G-CODE g VQT8773 Before attempting to connect, operate or adjust this product, please read these instructions completely. Dear Customer May we take this opportunity to thank you for purchasing this Panasonic Video Cassette Recorder. We would particularly advise that you carefully study the Operating Instructions before attempting to operate the unit and that you note the listed precautions. G-Code Programming System Programming is now easier than ever; simply enter the G-Code number found in the programme scheduling pages of newspapers and magazines. ¡ G-CODE is a registered trademark of Gemstar Development Corporation. The G-CODE system is manufactured under license from Gemstar Development Corporation. 2 Positions of Controls and Components Keep this page open as you read through the Operating Instructions. [. . . ] When playing back a tape which was recorded on another VCR, it may be necessary to adjust tracking control. In some cases the picture quality may still be inferior. Depending on the TV set used, the playback picture may roll up or down during special playback (Pause, Cue, Review, or Slow playback mode). However, this is not an indication of a malfunction. Convenient Automatic Functions VCR Auto Power On When you insert a video cassette, the VCR switches on automatically. Auto Playback Start When you insert a video cassette with a broken erasure prevention tab, playback start automatically without having to press the Play button I. VCR-off Playback When the VCR is off, an inserted cassette can be played back by pressing the Play button I. Auto Rewind When the tape reaches the end, the VCR automatically rewinds it to the beginning. This function does not work during timer recording and OTR. Automatic Switching Off and Ejection When the VCR is switched off, an inserted cassette can be ejected simply by pressing the EJECT button Y. The VCR will eject the cassette and automatically turn itself off again. VCR-off Search When the VCR is off, the VCR starts intro-jet scan of an inserted cassette by pressing the SEARCH button 4. To Play back in the Desired Picture Quality (Picture Mode) This function reproduces optimum playback picture from various kind of recorded tapes and contents. Press the PICTURE MODE button J and select the corresponding Picture Mode as follows. Example: Mode STANDARD DYNAMIC SOFT CARTOON Characteristic Normal Clear & Vivid Mild Delicate Example for Purpose TV Programme recorded Scenery, Sports Rental soft tape Cartoon Pressing the PICTURE MODE button J once makes the On Screen Display appear; after that, pressing it repeatedly changes the indication in the following order: STANDARD (Initial Setting) CARTOON DYNAMIC SOFT 18 Manual Recording Preparations Confirm that the VCR is on. Confirm that the TV is on and the VCR viewing channel is selected. Set the VCR/TV switch R to "VCR". To View One TV Programme while Recording Another TV Programme After pressing the REC button K to start recording, select on your TV the programme position of the TV programme that you want to view. Operations To Display the Approximate Remaining Tape Time The remaining tape time can be displayed in the VCR display. 1 Select "TAPE SELECT" from the on screen display and select the corresponding video cassette tape length. 2 VCR display 1 Insert a video cassette with an intact erasure prevention tab. If it has already been inserted, press the POWER button 1 to turn the VCR on. Select the TV station using the Channel button P. It is also possible to select by pressing the Numeric buttons 2. Press the REC (REC/OTR) button K (`) to start recording. REC 2 Press the DISPLAY button N repeatedly until the Remaining Tape Time appears on the VCR display. REMAIN 3 4 Pressing the DISPLAY button N once makes the VCR display appear; after that, pressing it repeatedly changes the indication in the following order: Clock Counter Remaining Tape Time For certain cassettes, the remaining tape time may not be displayed correctly. Press the Stop button 9 to stop recording. Press the SPEED button E before recording. SP provides standard recording time, optimum picture and sound quality. [. . . ] Lightning To avoid damage by lightning, disconnect the aerial plug from the VCR. Cleaning the VCR Wipe the VCR with a clean, dry cloth. Never use cleaning fluid or other chemicals. Do not use compressed air to remove any dust. [. . . ]