User manual PANASONIC NV-V10B

[. . . ] Check the source carefully when setting up the unit on a ship or other place where DC is used. AC mains lead protection: Ensure the AC mains lead is connected correctly and not damaged. Poor connection and lead damage can cause fire or electric shock. Service: Do not attempt to repair this unit by yourself. If the sound fails, the display is off, smoke escapes from the unit or any other problem occurs that is not described in these operating instructions, disconnect the power supply and contact your dealer or an authorised aftersales service centre. www. panasonic. co. uk (for UK and Republic of Ireland customers only) · Order accessory and consumable items for your product with ease and confidence by phoning our Customer Care Centre Mon-Friday 9:00am­5:30pm. (Excluding public holidays. ) · Or go on line through our Internet Accessory ordering application. [. . . ] Use or Numeric buttons to set the Date and Time. Press EXIT to exit the On Screen Display. Menu Timer recording Tuning Clock set Others EXIT :select : exit ENTER : access Clock / Zeit Datumset MANUAL To activate the automatic time correction function The correct time for the VCR clock can be automatically maintained when the VCR is tuned to a station that transmits a time signal. !03 Clock / Zeit Datumset AUTO Time Date : 12 : 00 : 00 : 11. 03 ! Press MENU and select Clock set . Under adverse reception conditions, etc. , the Automatic time correction function may not work. In this case, the indication for Clock setting is automatically reset to MANUAL. If the reception conditions improve later on, it may be possible to activate this function. Press EXIT to exit the On Screen Display. MANUAL, otherwise, the automatic time correction function is deactivated. In case of a power failure, an automatic back-up system maintains the clock for approximate 60 minutes. When Clock setting is set to AUTO, the automatic time correction function checks and if necessary adjusts the time several times every day. The automatic time correction function only works when the VCR is in standby, it does not work in the timer recording mode. Notes: - If Clock setting is set to AUTO when you open the Clock screen, do not set it to - 35 TV control Setting the Remote Control to operate your TV ! Set the VCR/TV/DVD switch to TV. VCR TV DVD Only Panasonic TVs can be operated with the provided remote control. Auto Playback Start When you insert a video cassette with a broken erasure prevention tab, playback starts automatically without pressing the Play button. VCR-off Playback When the VCR is off, and you press the Play button with a tape inserted, the VCR switches on and playback begins. Auto Rewind When the tape reaches the end, the VCR automatically rewinds it to the beginning (This function is disabled during timer recording). Automatic Switch Off and Eject When the VCR is switched off, a tape can be ejected by pressing the EJECT button. The VCR will eject the cassette and automatically turn itself off again. To eject the Video Cassette using the Remote Control Keep the Stop button pressed for more than 3 seconds. 39 DVD QUICK SETUP VCR TV DVD SETUP The items of the DVD QUICK SETUP menu provide an easy means of making some basic settings for your appliance. When the appliance is properly connected and the VCR AUTO SETUP is completed press Standby/On button to switch on the unit. Press the SETUP button on your remote control unit to display the QUICK SETUP menu which allows you to adapt the settings. Navigate the user-friendly and clearly arranged on-screen menu by means of the cursor keys on the remote control unit . RETURN to go back to the previous on-screen menu. [. . . ] UK and continental Europe: "2". Title DiscTOP MENU Menu TOP MENU Title Menu MENU Title Menu DVD menu:Some DVDs have multiple menus. Pressing TOP MENU to display the main menu may take to another menu than pressing MENU to display the menu screen. D The functions assigned to these buttons depend on the disc. Please refer to the disc documentation leaflet. [. . . ]