User manual PANASONIC NV-VZ9

[. . . ] n Do not obstruct the unit's ventilation openings with newspapers, tablecloths, curtains, and similar items. n Do not place sources of naked flames, such as lighted candles, on the unit. n Dispose of batteries in an environmentally friendly manner. Batteries, packaging and old equipment should not be disposed of as domestic waste, but in accordance with the applicable regulations. [. . . ] EP (SUPER LP) triple recording time: slightly reduced picture quality. Note: Distorted pictures produced when playing back some cassettes (e. g. type E300) after LP or EP recordings are not functional faults. n If the channel name is not set automatically, select your Channel [Pos] :; and store with o . To modify the [Name], see page 10. Timer recording Pos Start Name DATE ON 1. ARD 20/9 15:00 2. - - - - - - -/- - - -:- 3. - - - - - - -/- - - -:- Timer recording Pos Start Name DATE ON 1. - - - - - - -/- - - -:- - 1/2 Stop VPS OFF PDC 16:00 SP ON Panasonic VCR - -:- - - - - - - -:- - - - - - Panasonic n Set the Tape Speed SP, LP, EP or A (automatic). Stop OFF 16:00 SP - - - 1/2 VPS PDC VCR n Check the Remaining tape time. & - -:- - - - - - - -:- - - - - - - To delete or change a Timer recording, n press n Use :; to select the entry to be changed. n Press n Use the relevant function buttons to change the entries. to display the [Timer recording] menu. n To store the programme, press o . To preset other recordings repeat the procedure. to switch the VCR n Press to Standby mode. Child Lock Function To deactivate the buttons on the VCR and the remote control, Language setting n Press m n Select [Other settings] ; n Access by pressing o n Select [Language] ; n Select the input field 9 n Select the setting :; n Store by pressing o n Press e Restart Automatic settings n Press m n Select [Tuning] ; n Access by pressing o n Select [Auto - Setup Restart] ; n Press o n Confirm by pressing o Restoring the original settings of the VCR (Shipping condition) n Press m n Select [Tuning] ; n Access by pressing o n Select [Shipping condition] ; n Press o n Confirm by pressing o MESECAM setting n Press m n Select [Other settings] ; n Access by pressing o n Select [TV system] ; n Select the input field 9 n Set [MESECAM] :; n Store by pressing o n Press e Tape length setting n Press m n Select [Other settings] ; n Access by pressing o n Select the input field 9 n Set [Tape length] :; n Store by pressing o n Press e Main menu Timer recording Tuning Clock setting Other settings Other settings Tape length SQPB Power save VCR display OSD AV TV system Language Panasonic VCR Panasonic VCR : AUTO (8E-240) : AUTO : OFF : DIMMED : 4:3 : TV / EXT : PAL : English Panasonic VCR Main menu Timer recording Tuning Clock setting Other settings press the o and buttons at the same time until this display appears. This display will also appear if attempts are made to operate the VCR when this function is activated, to inform that the VCR cannot be operated. To cancel the Child Lock Function, press the same buttons until the display disappears. If the power supply of the VCR is disconnected, the Child Lock Function is cancelled after about 60 minutes. Playback Off Timer Function To stop the playback after a preset time, press the Playback Button > on the VCR for more than 3 seconds during playback. You can extend the playback time from 30, 60, 120, 180 to 240 minutes by pressing the button repeatedly . The selected length of playback time will appear on the VCR display. Tuning Manual Auto - Setup Restart Shipping condition Panasonic VCR Main menu Timer recording Tuning Clock setting Other settings Panasonic VCR Tuning Manual Auto - Setup Restart Shipping condition Panasonic VCR Main menu Timer recording Tuning Clock setting Other settings Panasonic VCR Intro Jet Scan Function You can playback the beginning of each recording with the Intro Jet Scan Function. The VCR will rewind to the start of the tape, and play with high speed for 10 seconds the beginning of each recording (which is longer than 15 minutes). Once you have found the recording, press the Playback Button > . To cancel the search function, press the Stop Button ` . Note: For more explanation of the SEARCH Button, see Programme List on page 7. Other settings Tape length : AUTO (8E-240) SQPB : AUTO Power save : OFF VCR display : DIMMED OSD : 4:3 AV : TV / EXT TV system : MESECAM Panasonic VCR Main menu Timer recording Tuning Clock setting Other settings Panasonic VCR Other settings Tape length : E - 195 SQPB : AUTO Power save : OFF VCR display : DIMMED Panasonic VCR VHS Index Search System To quickly find the beginning of a programme, press fast forward INDEX Button j , or press backward INDEX Button k. [. . . ] The batteries in the remote control are exhausted, or the batteries have not been inserted with the correct polarity. n Check the batteries and if necessary insert new batteries (see page 2). The recording function does not work correctly The VCR display is flashing when you try to record. n In order to record, use a video cassette with an intact erasure prevention tab (see page 6). [. . . ]