User manual PANASONIC NV-W1E

[. . . ] Important Your attention is drawn to the fact that the recording of pre-recorded tapes or discs or other published or broadcast material may infringe copyright laws. For your safety Do not remove outer cover. Touching internal parts of the VCR is dangerous, and may seriously damage it. To prevent electric shock, do not remove cover. [. . . ] Details of Weekly or Daily Timer Recording are not memorised and cannot be used with this function. Note: · Check that the [Á] is lit on the VCR display. If it is flashing, check the timer recording details again. (See page 14. ) Protecting programmes 1) Press the [I-TIMER] (15) to display the menu. 2) Press the [Cursor] (38) 43 to select the programme details that you want to protect, then press the [Cursor] (38) 1 to lock it. A lock symbol appears to the left of the programme. Locked programmes cannot be deleted. INTELLIGENT TIMER Panasonic VCR 27 / 10 / 02 Pos Name ZDF ARD ¢¢¢05 Date 27/10 27/10 28/10 Start Stop 20:00 21:30 20:00 21:30 10:30 11:30 VPS PDC SP SP EP ON ON sss Releasing the protection 1) Press the [I-TIMER] (15) to display the menu. 2) Press the [Cursor] (38) 43 to select the programme details that you want to release, then press the [Cursor] (38) 2. The lock symbol disappears. INTELLIGENT TIMER Panasonic VCR 27/ 10/ 02 Pos Name Date ZDF 27/10 Start 20:00 Stop 21:30 VPS PDC SP ON Using the Intelligent Timer function Intelligent Timer Function has two different operation A and B. Operation A When you want to set the programme as it is: 1) Press the [I-TIMER] (15) to display the menu. 2) Press the [Cursor] (38) 34 or [I-TIMER] (15) to select the desired programme. 3) Press [TIMER] (20) to store the programming and the VCR will switch to the timer recording stand-by mode. · If you programme linked timer recordings, Programme List Search function does not work. INTELLIGENT TIMER INTELLIGENT TIMER AV3 IN VIDEO L/MONO AUDIO R AV3 IN VIDEO L/MONO AUDIO R (42) Digital still camera Video movie camera (43) · Connect a digital still camera, a video movie camera or another external source to the Video Input socket and Audio Input sockets on the front panel of this VCR. 1) Press the [STILL ALBUM] (6) on the remote control to put the VCR in the recording pause mode. · The VCR automatically selects the AV Input (external input) [A3] and then switches over to the recording pause mode. The figure for the preset recording time (seconds) appears on the VCR display. The initial setting is [05] (5 seconds). REC VISS=VHS Index Search System · Each programme recorded on the tape must be at least 5 minutes long. Press the [INDEX] (31) to start the index search. If you want to search for the 2nd recorded programme in forward direction, press the [INDEX] (31) L twice. · The VCR fast-forwards or rewinds the tape and searches for the specified index signal. When it has been found, playback starts automatically. To Cancel the Index Search or to Stop Playback Press the [Stop] (9). 2) Press the [INDEX] (31) L or [INDEX] (31) K to change the recording time. You can set any time between [3] and [20] seconds. 3) Start playback on the source unit to search for the point from which you want to copy onto this VCR. [. . . ] 20 LP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 10, 13, 14 M Manual tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 18 Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 MESECAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]