User manual PANASONIC P110I

[. . . ] RealD is one of the inventors in 3D technology. DVB-T tuner built-in Receives DVB (Digital Video Broadcasting) digital terrestrial broadcasts. DVB-T2 tuner built-in DVB-T2 is an advanced digital terrestrial system for more efficient transmission. Available DVB-T2 broadcasts will be tuned automatically when you perform DVB Auto Setup. [. . . ] In the unfortunate event of theft, the Owner ID will help the Police to determine the owner. 1 2 3 Display the menu and select [Setup] select Setup access Select [System Menu] select System Menu Access access Select [Owner ID] System Menu Owner ID Access select access Input owner ID [Owner ID] 1 Enter the PIN number (4 digits) Owner ID Please enter new PIN PIN **** Enter the PIN number twice at first setting. Make a note of the PIN number in case you forget it. Return to select other items 2 Select the item (NAME / HOUSE NO / POSTCODE) and set characters Owner ID-Data Entry PIN NAME HOUSE NO POSTCODE User input Owner ID **** NAME select access select set To use numeric buttons (p. 100) Select the next item and repeat the operations. 3 Exit the menu To check the personal information stored Hold down for about 5 seconds Owner ID NAME HOUSE NO POSTCODE EXIT ***** ***** **** ** The PIN number is not displayed. To change the PIN number 1. Select [PIN] Owner ID-Data Entry PIN NAME HOUSE NO POSTCODE 2. Enter a new PIN number twice select **** access 58 Using Common Interface The Common Interface Module menu provides access to software contained on Common Interface (CI) Modules. This TV works only for Pay TV modules complying with CI standard. Video and audio signals may not be output depending on broadcasts or services. Caution Turn off Mains power On / Off switch whenever inserting or removing the CI module. If a view card and a card reader come as a set, first insert the card reader, then insert the view card into the card reader. Insert the module in the correct direction. Rear of the TV CI slot Insert or remove completely CI module Insert the CI module (optional) The features that appear on screen are dependent on the contents of the selected CI module. Do not turn the TV off, remove the USB HDD during operation (formatting, recording, etc. ). It may cause malfunction of the device or damage the recorded data. Preparation for USB HDD Connect the USB HDD to the USB 1 port with the USB cable. Be sure to connect the USB HDD to the socket outlet. To remove the USB HDD safely from the TV (p. 23, 63) Check the type of terminals and cable plugs are correct when connecting. socket outlet USB cable USB HDD USB HDD Recording 1 Display the menu and select [Setup] select Setup access 2 Select [Recording Setup] select Recording Setup Access access Setting for USB HDD Format and setup the USB HDD with this TV in order to use it for recording. Before the settings, connect the USB HDD (see above) and be sure to turn on the USB HDD. Prepare the USB HDD for the exclusive use of recording with this TV. Select [USB HDD Setup] and set Recording Setup USB HDD Setup Access select access 62 Setup the USB HDD [USB HDD Setup] All the USB devices recognised as a mass storage device will be listed. You can only choose one USB HDD for recording at a time. You cannot change the settings for the USB HDD while recording is in progress. [. . . ] Playback from M. NTSC Video recorders (VCR). Playback from NTSC Video recorders (VCR). VHF A - J CATV S1 - S20 UHF E21 - E69 CATV S21 - S41 (Hyperband) Receiving systems / Band name Check the latest information on the available services at the following website. http://panasonic. jp/ support/global/cs/tv/ M. NTSC NTSC (AV input only) DVB-T PAL I PAL 525/60 M. NTSC NTSC (AV input only) Playback of NTSC tape from some PAL Video recorders (VCR) or NTSC disc playback from DVD player and recorder. [. . . ]