User manual PANASONIC PAX410

[. . . ] Declaration of Conformity: L Panasonic Communications Co. , Ltd. declares that this equipment is in compliance with the essential requirements and other relevant provisions of Radio & Telecommunications Terminal Equipment (R&TTE) Directive 1999/5/EC. Declarations of Conformity for the relevant Panasonic products described in this manual are available for download by visiting: http://www. doc. panasonic. de Contact: Panasonic Services Europe a Division of Panasonic Marketing Europe GmbH Panasonic Testing Centre Winsbergring 15, 22525 Hamburg, Germany Trademarks: L Microsoft, Windows and PowerPoint are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. L Pentium is a registered trademark or trademark of Intel Corporation in the United States and/or other countries. [. . . ] ­ "PHOTO": For documents containing photographs, shaded drawings, etc. Note: L You can change the default resolution in feature #461 (page 55). 6. 1. 1 More copying features To enlarge a document 1. Insert the document, then press {COPY START}. Press {A} repeatedly to select from "105%" to "200%" by changing the enlargement rate 5% at a time. L The unit will only enlarge the centre of the upper part of the document. To make an enlarged copy of the bottom of the document, turn the document around, and then make a copy. Example: 150% enlarged copy Original document AB CD {A}{B} {COLLATE} {STOP} {COPY START} {RESOLUTION} 1 2 Adjust the width of the document guides (1) to fit the actual size of the document. Insert the document (up to 20 pages) FACE DOWN until a single beep is heard and the unit grasps the document. L If the document guides are not adjusted to fit the document, re-adjust them. If necessary, press {RESOLUTION} repeatedly to select the desired resolution. If necessary, enter the number of copies (up to 99). Multi-Function Station software administrator in order to install MultiFunction Station. L Install Multi-Function Station before connecting the fax machine to a computer. If the fax machine is connected to a computer before installing Multi-Function Station, the [Found New Hardware Wizard] dialogue box will appear. L If the fax machine is connected to your computer, the model name will be automatically detected. L You can change the names for the printer, PC fax, and scanner if necessary. 7 Click [Install], then follow the on-screen instructions. L The files will be copied to your computer. 2 Insert the included CD-ROM into your CDROM drive. L The [Choose Setup Language] dialogue box will appear. Select the desired language that you want to use with this software from the drop-down list. The installation will automatically start. L If the [Choose Setup Language] dialogue box does not appear: The installation will automatically start. L If the installation does not start automatically: Click [Start]. [. . . ] ITU-T No. 1 Test Chart Note: L Design and specifications are subject to change without notice. L The pictures and illustrations in these instructions may vary slightly from the actual product. 79 10. General Information Recording paper specifications Recording paper size: A4: 210 mm × 297 mm Letter: 216 mm × 279 mm Legal: 216 mm × 356 mm Envelope size: #10: 105 mm × 241 mm DL: 110 mm × 220 mm Recording paper weight: 60 g/m2 to 90 g/m2 Note for recording paper: L We recommend that you test paper (especially special sizes and types of paper) on the unit before purchasing large quantities. L Do not use the following types of paper: ­ Paper with a cotton and/or fibre content that is over 20 %, such as letterhead paper or paper used for resumes ­ Extremely smooth or shiny paper, or paper that is highly textured ­ Coated, damaged or wrinkled paper ­ Paper with foreign objects attached, such as tabs or staples ­ Paper which has dust, lint or oil stains ­ Paper that will melt, vaporize, discolour, scorch or emit dangerous fumes near 200 °C, such as vellum paper. [. . . ]