User manual PANASONIC PT-AE2000

[. . . ] Operating Instructions LCD Projector Model No. PT-AE2000U Before operating this product, please read the instructions carefully and save this manual for future use. TQBJ0233 ENGLISH Important Safety Notice Dear Panasonic Customer: The following information should be read and understood as it provides details, which will enable you to operate the projector in a manner which is both safe to you and your environment, and conforms to legal requirements regarding the use of projectors. Before connecting, operating or adjusting this projector, please read these instructions completely and save this booklet with the projector for future reference. We hope it will help you to get the most out of your new product, and that you will be pleased with your Panasonic LCD projector. [. . . ] Adjust the BRIGHTNESS by pressing I H. Adjust the bottom line of the waveform to 0% (0 or 7. 5 IRE). Adjust the CONTRAST by pressing I H. Adjust the bottom line of the waveform to 100% (100 IRE). Setting range: -64 to +64 FULL SCAN(Y)/SINGLE LINE SCAN(Y) Adjust the bottom line of the BRIGHTNESS waveform to 0% (0 IRE or 7. 5 IRE) Adjust the top line of the waveform CONTRAST to 100% (100 IRE) NOTE: · In SINGLE LINE SCAN mode, the position of the waveform monitor depends on the position of the selected line. · You can display the main menu by pressing the MENU button and adjust the menu items. · The called up menu items displayed position depends on the position of the waveform monitor. · You can activate AUTO ADJUST of the WAVEFORM menu by pressing the DEFAULT button. · The signal which is lower than 0% in the waveform will be displayed as same as 0% on the projected image. · While the waveform is displayed, the image is displayed without the COLOR MANAGEMENT adjustment. · When adjusting the KEYSTONE of the POSITION menu while the waveform is displayed, xvYCC will be deactivated. 24 - ENGLISH Remote control operation Adjusting with RGB options 1. Press the ENTER button until the required option is displayed. ADJUST twice to display the GAMMA of the ADVANCED MENU menu. Press G several times to display the required brightness option. Adjust the brightness option by pressing I H. Adjust the bottom line of the waveform to 0% (0 IRE or 7. 5 IRE). Setting range: -16 to +16 FULL SCAN(R)/SINGLE LINE SCAN(R) Adjust the bottom line of the BRIGHTNESS R waveform to 0% (0 IRE or 7. 5 IRE) Adjust the top line of the waveform CONTRAST R to 100% (100 IRE) FULL SCAN(G)/SINGLE LINE SCAN(G) Adjust the bottom line of the BRIGHTNESS G waveform to 0% (0 IRE or 7. 5 IRE) Adjust the top line of the waveform CONTRAST G to 100% (100 IRE) FULL SCAN(B)/ Adjust the bottom line of the BRIGHTNESS B waveform to 0% (0 IRE or 7. 5 IRE) Adjust the top line of the waveform CONTRAST B to 100% (100 IRE) 5. Press G once to display the required contrast option. Adjust the contrast option by pressing I H. Adjust the top line of the waveform to 100% (100 IRE). Setting range: -32 to +32 Adjusting the focus and zoom You can adjust the focus and zoom of the projected image. Press the LENS button to display the LENS CONTROL menu. See "LENS CONTROL" on page 39. You can switch the preset picture mode settings by pressing the PIC. Press the button until the required setting is selected. See "PICTURE MODE" on page 31. NORMAL DYNAMIC CINEMA3 CINEMA2 COLOR1 COLOR2 CINEMA1 Adjusting the image You can display the PICTURE and ADVANCED MENU menu items with called up style by pressing the PIC. Press the button to switch between PICTURE and ADVANCED MENU menu. [. . . ] 18 Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 N Navigation buttons Control panel button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Remote control button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 NR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 O OPTION menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 OSD DESIGN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 OSD POSITION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 OVER SCAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 T Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 TEMP Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Indicator status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]