User manual PANASONIC PT-AE900

[. . . ] CAUTION: The AC power cord which is supplied with the projector as an accessory can only be used for power supplies up to 125 V, 7 A. If you need to use higher voltages or currents than this, you will need to obtain a separate 250 V power cord. If you use the accessory cord in such situations, fire may result. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. CAUTION: This equipment is equipped with a three-pin grounding-type power plug. [. . . ] Press the SLEEP button several times to cycle through the duration of time. See "SLEEP" on page 39. OFF 60MIN. 150MIN. Loading a saved setting You can access saved settings instantly. 1. Select the required setting from MEMORY1 - 5. Undefined setting will not be displayed. Press ENTER to activate the selected setting. NOTE: If you have not saved any settings, MEMORY1 - 5 will not be displayed. ENGLISH - 25 Basic Operation Remote control operation Setting your own color profile You can adjust a selected color individually and save and retrieve under the PICTURE MODE setting. Press the COLOR MANAGEMENT button to open the menu. 3. Select a menu item and the I H to adjust each item level. The result box is displayed on the right of the cursor and shows the adjusted color. CURSOR RETURN SELECT ENTER DEFAULT COLOR TINT BRIGHTNESS PROFILE CURSOR LOG PROFILE SAVE NORMAL Create a new profile Adjusting the selected color Select a color and adjust COLOR, TINT and BRIGHTNESS. Adjusted color 1. Select the CURSOR menu and press ENTER. The projected image is captured, and the target cursor is displayed. When the LOG is fully stored, the target cursor will not be displayed. The confirmation screen will be displayed. When you select ALL DELETE, the "DELETE ALL LOG. " screen is displayed. The PROFILE setting will be set to NORMAL. Saving a log setting as a profile Return to the COLOR MANAGEMENT menu and save the stored log as a profile. Make sure that the PICTURE MODE is not switched. 1. Select the PROFILE SAVE menu and press ENTER The PROFILE SAVE menu is displayed. You can save the profile as USER1, USER2 and USER3. USER1 USER2 USER3 2. Press ENTER to save the profile The confirmation screen is displayed. Press ENTER again to save. ENGLISH - 27 Basic Operation 2. Select the required log from 1 - 8 or ALL DELETE, and press ENTER. USER2 Menu Navigation The menu system allows you to access functions which do not have their own dedicated buttons on the Remote control. The menu options are structured and categorized. You can navigate through the menu with F G I H buttons. Navigating through the MENU Displaying the Main menu Press MENU button to display the Main menu and the operating guidance. [. . . ] 50 STARTUP LOGO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 S-VIDEO IN Connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Basic format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]