User manual PANASONIC PT-51SX30B

[. . . ] The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the appliance. WARNING: To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or moisture. Do not place containers with water (flower vase, cups, cosmetics, etc. ) above the set. (including on shelves above, etc. ) WARNING: 1) To prevent electric shock, do not remove cover. Refer servicing to qualified service personnel. [. . . ] Use with any other type of optional accessories may cause instability which could result in the possibility of injury. (All of the following accessories are manufactured by Matsushita Electric Industrial Co. , Ltd. ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . · Speakers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TY-SP50PHD3W · Pedestal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TY-ST42PT1U TY-ST42PW1 · Wall stand Wall-hanging bracket (angled) . . . . . . . . . . . . . . . . . . TY-WK42PR1 · Always be sure to ask a qualified technician to carry out set-up. When using the High Definition Plasma Display Do not bring your hands, face or objects close to the ventilation holes of the High Definition Plasma Display. Top of High Definition Plasma Display is usually very hot due to the high temperature of exhaust air being released through the ventilation holes. Burns or personal injuries can happen if any body parts are brought too close. Furthermore, do not leave it for long periods in contact with articles made from rubber or PVC. Note: Do not allow a still picture to be displayed for an extended period, as this can cause a permanent after-image to remain on the High Definition Plasma Display. Examples of still pictures include logos, video games, computer images, teletext and images displayed in 4:3 mode. 8 Accessories Accessories Supplied Check that you have the Accessories and items shown Operating Instruction book Remote Control Transmitter EUR646525 INPUT Batteries for the Remote Control Transmitter (AA(R6) Battery × 2) SURROUND VOL N R PICTURE SOUND SET UP PICTURE POS. The off timer is cancelled if a power interruption occurs. 11 Connections SPEAKER Terminals (R) SPEAKER Terminals (L) ­ Cable fixing bands Secure any excess cables with bands, as required. To tighten: To loosen: Push the knob Pull Pull From TUNER signal out Terminal (see page 14) From EXIT monitor Terminal on Computer (see page 16) From SERIAL Terminal on Computer (see page 17) L L AUDIO S-VIDEO VIDEO R VD HD PR/CR/R PB/CB/B Y/G AUDIO AUDIO R AV IN COMPONENT/RGB IN PC IN TUNER IN SERIAL AV IN Terminals (see page 13, 14) COMPONENT/RGB IN and Audio IN Terminals (see page 15) 12 Connections How to connect the speakers When connecting the speakers, be sure to use only the optional accessory speakers. Refer to the speaker's Installation Manual for details on speaker installation. Make sure to use the supplied ferrite core speaker cables to connect the speakers. Other types of speaker cable are not suitable. 1 Remove the tubes from the ends of the speaker cables. 2 Speakers (Optional accessories) 3 1 2 How to connect the AV Input Terminals Connect the signal source equipment (see pages 14 to 17). (Example) When connecting an S-VIDEO VCR (S-VIDEO VCR) L R Audio OUT L Video OUT S-Video OUT AUDIO S-VIDEO VIDEO R AV IN S-VIDEO 4 pin socket Luminance earth Chrominance earth Video input to S-VIDEO socket S-VIDEO Luminance in Chrominance in AUDIO 2×RCA audio cables Audio input to L/R sockets 13 Connections How to connect the AV Input Terminals VIDEO signal connection (VCR) R Audio OUT L Video OUT VIDEO BNC video cable AUDIO 2×RCA audio cables (VCR) Video input to BNC socket Audio input to L/R sockets L AUDIO S-VIDEO R Audio OUT L Video OUT VIDEO R AV IN VIDEO RCA video cable Video input to BNC socket RCA-BNC adapter plug AUDIO 2×RCA audio cables Audio input to L/R sockets How to connect the CONTROLLER TUNER Input Terminals The CONTROLLER TUNER input terminal is reserved for use with future external compatible components. CONTROLLER/TUNER (Model No. TU-PTA500U) L AUDIO AUDIO R PC IN TUNER IN K1HA26FA0001 (Tuner accessories) Notes: (1) Additional equipment and cables shown are not supplied with this set. (2) When connecting video cables, priority is given to the S-VIDEO cable when the S-VIDEO input terminal and the video input terminal are connected at the same time. (3) Install the CONTROLLER/TUNER at least 15. 75 inch (40 cm) away from the High Definition Plasma Display to avoid interference. (4) Be sure the power to the High Definition Plasma Display and CONTROLLER/TUNER is OFF before connecting cables. 14 Connections How to connect the COMPONENT/RGB Input Terminals Component signals (Y, PB, PR) connection DVD Player L AUDIO VD Audio OUT L DVD (Y, PB, PR) OUT Y PB PR HD PR/CR/R PB/CB/B Y/G R R COMPONENT/RGB IN RCA-BNC adapter plug Y, PB, PR 3×RCA video cables AUDIO 2×RCA audio cables Audio input to L/R sockets Notes: (1) Change the "COMPONENT/RGB-IN" setting in the "SET UP" menu to "Y/PB/PR". (see page 30, 32) (2) Additional equipment and cables shown are not supplied with this set. RGB signal (R, G, B, HD, VD) connection Example of input signal source HDTV-compatible VCR RGB input to R, G, B, HD, VD sockets 5×BNC RGB cables L or RGB camera VD HD AUDIO 2×RCA audio cables Audio input to L/R sockets AUDIO VD HD PR/CR/R PB/CB/B Y/G R COMPONENT/RGB IN Notes: (1) Change the "COMPONENT/RGB-IN" setting in the "SET UP" menu to "RGB". [. . . ] Press to adjust. SIGNAL CLAMP POSITION SIGNAL [ RGB ] [ COMPONENT ] The following operation methods are the same for both the SIGNAL [RGB] and SIGNAL [PC]. H&V SYNC NARROW PULL-IN RANGE CLAMP POSITION H-FREQ. 60. 0 Hz SIGNAL [ PC ] H&V SYNC NARROW PULL-IN RANGE CLAMP POSITION H-FREQ. 60. 0 Hz SYNC Setting RGB sync signal setting: Confirm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT). H&V: The H and V sync signals are input from the HD/VD (BNC) connector. [. . . ]